Jump to content
Find Professionals    Deals    Get Quotations   Portfolios
Sign in to follow this  
Followers 0
icebaby

Aircon Quotes (From Aron)

By icebaby, in Electronics & Electricals

Recommended Posts

Aron    0

Aron
Posted

Hi all renotalk members, we are running a special air-con promotion for MITSUBISHI STARMEX:- (Please email aron at aronputt@gmail.com for this promotion)

A) Special Renotalk Price: $3850 nett for Mitsubishi Inverter system 4 (current model, 18kbtu + 9kbtu X 3)
B) Special Renotalk Price: $2999 nett for Mitsubishi Inverter system 3 (current model, 9kbtu X 3)
B) Special Renotalk Price: $2899 nett for Panasonic Inverter system 3 (new model, 9kbtu X 3) 
C) Special Renotalk Price for brands like daikin, toshiba, LG etc. Single Split, System 2/3/4 available for both inverter and non-inverter.

* Free & no obligation Site Survey
* Free 2 trips installation (1st trip to run piping, 2nd trip to put up air-cons [if needed])
* Free dismantle and disposal of old air-con
* Free upgrade to Armaflex class “O” 1/2 inch thick insulation,G22 copper pipe,keystone cable (made in singapore),16mm drainage pipe
* Special coordinating work between us and customer’s contractor
* Special appointed installation team
* Special supervising work by head of installer

Terms & Conditions
*All promotion items while stock last
*All prices include HDB standard installation

We have set up a facebook page (link below) specially for you and all Star Cool customer who will like to seek for after sales service, air-con advise and quotation. Please kindly dropby and give us a like if you are satisfy with our services.

This facebook page will also serve as a channel for you to contact us if you have any enquiry in regards to your aircon.
 
 

Thank you,

Aron
(aronputt@gmail.com)

 

Share this post

Link to post
Share on other sites
Looking for good contractors? Click here for your request

pandaboxer    0

pandaboxer
Posted

Hi ,

Please quote the following for 5 rm BTO which I like to air con 3 bed rooms, 1 study room, 1 living room.

MITSUBISHI SYS 3 - INVERTER (2 ticks)
MXY3A28VA
MSYGE10VA x 02
MSYGE24VA  x 01

MITSUBISHI SYS 2 - INVERTER (2 ticks)

MXY2E20VA
MSYGE10VA x 02

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

Thanks

 

Share this post

Link to post
Share on other sites

Aron    0

Aron
Posted
19 hours ago, pandaboxer said:

Hi ,

Please quote the following for 5 rm BTO which I like to air con 3 bed rooms, 1 study room, 1 living room.

MITSUBISHI SYS 3 - INVERTER (2 ticks)
MXY3A28VA
MSYGE10VA x 02
MSYGE24VA  x 01

MITSUBISHI SYS 2 - INVERTER (2 ticks)

MXY2E20VA
MSYGE10VA x 02

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

Thanks

Hi,

I have just PMed to you.

Thank you,

Aron (aronputt@gmail.com)

https://www.facebook.com/Star-Cool-Air-Condition-Engineering-Aron-Ah-Boon-355281117982556/?ref=hl

 

Share this post

Link to post
Share on other sites

Aron    0

Aron
Posted

Hi all renotalk members, we are running a special air-con promotion for MITSUBISHI STARMEX:- (Please email aron at aronputt@gmail.com for this promotion)

A) Special Renotalk Price: $3850 nett for Mitsubishi Inverter system 4 (current model, 18kbtu + 9kbtu X 3)
B) Special Renotalk Price: $2999 nett for Mitsubishi Inverter system 3 (current model, 9kbtu X 3)
B) Special Renotalk Price: $2899 nett for Panasonic Inverter system 3 (new model, 9kbtu X 3) 
C) Special Renotalk Price for brands like daikin, toshiba, LG etc. Single Split, System 2/3/4 available for both inverter and non-inverter.

* Free & no obligation Site Survey
* Free 2 trips installation (1st trip to run piping, 2nd trip to put up air-cons [if needed])
* Free dismantle and disposal of old air-con
* Free upgrade to Armaflex class “O” 1/2 inch thick insulation,G22 copper pipe,keystone cable (made in singapore),16mm drainage pipe
* Special coordinating work between us and customer’s contractor
* Special appointed installation team
* Special supervising work by head of installer

Terms & Conditions
*All promotion items while stock last
*All prices include HDB standard installation

We have set up a facebook page (link below) specially for you and all Star Cool customer who will like to seek for after sales service, air-con advise and quotation. Please kindly dropby and give us a like if you are satisfy with our services.

This facebook page will also serve as a channel for you to contact us if you have any enquiry in regards to your aircon.
 
 

Thank you,

Aron
(aronputt@gmail.com)

 

Share this post

Link to post
Share on other sites

JAI13    0

JAI13
Posted

Hi Aron,

Would appreciate if you can quote me the following. My place is a 4rm HDB resale. Looking at either this 2 specs.

Daikin. System 3 Spec 1

3MKS71FSG / FTKJ25NVMS x 2 + FTKS60FVM

Spec 2
3MKS71FSG / FTSK25DVM x 2 + FTKS60FVM 

please provide broken down cost for:

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- warranty (parts and installation)

Thank you

 

Share this post

Link to post
Share on other sites

lipton    0

lipton
Posted

Hi Aron,

I will like to get quotation for myself and my friend's house below:

Quote 1 - Landed Property 
Panasonic single split - CU-XS9RKZ (new model, 9000 BTU)
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Quote 2 - HDB
Panasonic system 2 - CU-2XS18RKZ (new model, 2 x 9000 BTU)
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Questions
For survey, is it available on weekend or after 6PM?
Is installation available on Saturday?

 

Share this post

Link to post
Share on other sites

fbvp    0

fbvp
Posted

hi Aron

kindly quote for the following

HDB 4 room

Starmex (kindly give option for 2 ticks and 5 ticks)

 - 3 x 9,000 BTU, 1 x 18,000
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
 

 

 

Share this post

Link to post
Share on other sites

Aron    0

Aron
Posted
On 6/6/2016 at 4:21 PM, JAI13 said:

Hi Aron,

Would appreciate if you can quote me the following. My place is a 4rm HDB resale. Looking at either this 2 specs.

Daikin. System 3 Spec 1

3MKS71FSG / FTKJ25NVMS x 2 + FTKS60FVM

Spec 2
3MKS71FSG / FTSK25DVM x 2 + FTKS60FVM 

please provide broken down cost for:

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- warranty (parts and installation)

Thank you

Hi,

I have just PMed to you.

Thank you,

Aron (aronputt@gmail.com)

https://www.facebook.com/Star-Cool-Air-Condition-Engineering-Aron-Ah-Boon-355281117982556/?ref=hl

 

Share this post

Link to post
Share on other sites

Aron    0

Aron
Posted
On 6/12/2016 at 11:58 PM, fbvp said:

hi Aron

kindly quote for the following

HDB 4 room

Starmex (kindly give option for 2 ticks and 5 ticks)

 - 3 x 9,000 BTU, 1 x 18,000
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
 

 

Hi,

I have just PMed to you.

Thank you,

Aron (aronputt@gmail.com)

https://www.facebook.com/Star-Cool-Air-Condition-Engineering-Aron-Ah-Boon-355281117982556/?ref=hl

 

Share this post

Link to post
Share on other sites

Aron    0

Aron
Posted

Hi all renotalk members, we are running a special air-con promotion for MITSUBISHI STARMEX:- (Please email aron at aronputt@gmail.com for this promotion)

A) Special Renotalk Price: $3850 nett for Mitsubishi Inverter system 4 (current model, 18kbtu + 9kbtu X 3)
B) Special Renotalk Price: $2999 nett for Mitsubishi Inverter system 3 (current model, 9kbtu X 3)
B) Special Renotalk Price: $2899 nett for Panasonic Inverter system 3 (new model, 9kbtu X 3) 
C) Special Renotalk Price for brands like daikin, toshiba, LG etc. Single Split, System 2/3/4 available for both inverter and non-inverter.

* Free & no obligation Site Survey
* Free 2 trips installation (1st trip to run piping, 2nd trip to put up air-cons [if needed])
* Free dismantle and disposal of old air-con
* Free upgrade to Armaflex class “O” 1/2 inch thick insulation,G22 copper pipe,keystone cable (made in singapore),16mm drainage pipe
* Special coordinating work between us and customer’s contractor
* Special appointed installation team
* Special supervising work by head of installer

Terms & Conditions
*All promotion items while stock last
*All prices include HDB standard installation

We have set up a facebook page (link below) specially for you and all Star Cool customer who will like to seek for after sales service, air-con advise and quotation. Please kindly dropby and give us a like if you are satisfy with our services.

This facebook page will also serve as a channel for you to contact us if you have any enquiry in regards to your aircon.
 
 

Thank you,

Aron
(aronputt@gmail.com)

 

Share this post

Link to post
Share on other sites

lushiris7    0

lushiris7
Posted
1 hour ago, Aron said:

Hi all renotalk members, we are running a special air-con promotion for MITSUBISHI STARMEX:- (Please email aron at aronputt@gmail.com for this promotion)

A) Special Renotalk Price: $3850 nett for Mitsubishi Inverter system 4 (current model, 18kbtu + 9kbtu X 3)
B) Special Renotalk Price: $2999 nett for Mitsubishi Inverter system 3 (current model, 9kbtu X 3)
B) Special Renotalk Price: $2899 nett for Panasonic Inverter system 3 (new model, 9kbtu X 3) 
C) Special Renotalk Price for brands like daikin, toshiba, LG etc. Single Split, System 2/3/4 available for both inverter and non-inverter.

* Free & no obligation Site Survey
* Free 2 trips installation (1st trip to run piping, 2nd trip to put up air-cons [if needed])
* Free dismantle and disposal of old air-con
* Free upgrade to Armaflex class “O” 1/2 inch thick insulation,G22 copper pipe,keystone cable (made in singapore),16mm drainage pipe
* Special coordinating work between us and customer’s contractor
* Special appointed installation team
* Special supervising work by head of installer

Terms & Conditions
*All promotion items while stock last
*All prices include HDB standard installation

We have set up a facebook page (link below) specially for you and all Star Cool customer who will like to seek for after sales service, air-con advise and quotation. Please kindly dropby and give us a like if you are satisfy with our services.

This facebook page will also serve as a channel for you to contact us if you have any enquiry in regards to your aircon.
 
 

Thank you,

Aron
(aronputt@gmail.com)

 

how much for Mitsubishi Starmex 2-ticks in this config: MXY3A28 + MSYGE10 x2 + MSYGE18 x1

 

Share this post

Link to post
Share on other sites

foo99425    0

foo99425
Posted

hi Aron

kindly quote for the following

HDB 5 room

Starmex (kindly give option for 2 ticks and 5 ticks)

 - 3 x 9,000 BTU, 1 x 18,000
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation

Thank you

 

Share this post

Link to post
Share on other sites

Aron    0

Aron
Posted
30 minutes ago, foo99425 said:

hi Aron

kindly quote for the following

HDB 5 room

Starmex (kindly give option for 2 ticks and 5 ticks)

 - 3 x 9,000 BTU, 1 x 18,000
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation

Thank you

Hi,

I have just PMed to you.

Thank you,

Aron (aronputt@gmail.com)

https://www.facebook.com/Star-Cool-Air-Condition-Engineering-Aron-Ah-Boon-355281117982556/?ref=hl

 

Share this post

Link to post
Share on other sites

Lee Ling    0

Lee Ling
Posted (edited)

Hi aron

Can you quote mhi and any similar brands (3 ticks and above?)

System 2 and system 3. 9k btu will do.

 

Also wondering if i get 2 x 9k btu, my compressor will need to be a minimum of 19k btu?

Thank u!

Edited by Lee Ling
 

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

×