kriegs 0 Report post Posted May 2, 2008 CNA channel is not gone.. just have to retune it.. that's wat i did after they activated the starhub signal.. the original frequency cannot work liao.. have to research for the new one.. I did the same for Channel U i think.. No wonder. tink will left the tuning for now Onepostwonder: Yup, CNA is on starhub box Share this post Link to post Share on other sites
Zlia 0 Report post Posted May 4, 2008 Hello all, check with you, for those who retained the toilet sinks installed by HDB, do you realise that when u take out the sticker / plastic layer for the stopper, the sticker is unable to come out completely and nicely. as in, there will be some remaining blue plastic at the side of the stopper. how do you get rid of the remaining plastic? am quite irritated by the sight of it. haha. Share this post Link to post Share on other sites
Yang Guo 7 Report post Posted May 4, 2008 oh ya..everybody take note of this: When u first time boil water to drink, dont use the water from your kitchen cabinet "tap". *Use the water from the bathroom U need to let the water run through the new tap many times first cos "inside" of the new tap is very dirty. At first i dont know cos all the water that i boiled has funny smell. Then friends told me this and i got to learn abt it Share this post Link to post Share on other sites
h4happy 1 Report post Posted May 5, 2008 Hi YG..thanks!!! Will take note of it! BTW...I intend to diy for curtain. Went to spot light and saw a metal rod that can be connected by a movable joint, which can make a L joint for L shape window. Is it advisable? HAPPY oh ya..everybody take note of this: When u first time boil water to drink, dont use the water from your kitchen cabinet "tap". *Use the water from the bathroom U need to let the water run through the new tap many times first cos "inside" of the new tap is very dirty. At first i dont know cos all the water that i boiled has funny smell. Then friends told me this and i got to learn abt it Share this post Link to post Share on other sites
dorcas 0 Report post Posted May 5, 2008 Hi Wireless, How is your PT maid? Is she good? My maid is working quite slow and likes to talk non-stop. So cannot get too close to her. Her cleaning knowledge is not very good too. I think I got to change mine. Share this post Link to post Share on other sites
h4happy 1 Report post Posted May 5, 2008 Hi Dorcas Better to have one that dont talk much...afterall they count by hourly rate. If keeps on talking and slow down, the owner has to pay more! HAPPY Hi Wireless, How is your PT maid? Is she good? My maid is working quite slow and likes to talk non-stop. So cannot get too close to her. Her cleaning knowledge is not very good too. I think I got to change mine. Share this post Link to post Share on other sites
OnePostWonder 0 Report post Posted May 5, 2008 HHS - Who has done theirs? What dimension & price? I was quoted a 80" non L-shape rack @ $200 Share this post Link to post Share on other sites
dorcas 0 Report post Posted May 5, 2008 Hi Dorcas Better to have one that dont talk much...afterall they count by hourly rate. If keeps on talking and slow down, the owner has to pay more! HAPPY Hi Happy, Yes, precisely! When she talks, her hands do not move. Sigh... Are you looking for one too? cheers Dorcas Share this post Link to post Share on other sites
kriegs 0 Report post Posted May 5, 2008 HHS - Who has done theirs? What dimension & price? I was quoted a 80" non L-shape rack @ $200 I did mine at $180, it the normal L-shape rack design you see pasted all over the lift. Share this post Link to post Share on other sites
wireless 0 Report post Posted May 5, 2008 Hi Wireless, How is your PT maid? Is she good? My maid is working quite slow and likes to talk non-stop. So cannot get too close to her. Her cleaning knowledge is not very good too. I think I got to change mine. mine still not up to my standard. going to enagage another to try out this weekend. will keep u posted. Share this post Link to post Share on other sites
nemofc 0 Report post Posted May 5, 2008 Sidetrack abit... Anyone know of any infant care nearby? or any babysitter to recommend nearby? Share this post Link to post Share on other sites
kitseng 0 Report post Posted May 5, 2008 What is the type of wood they used? wat is the depth of the shelves? HHS - Who has done theirs? What dimension & price? I was quoted a 80" non L-shape rack @ $200 Share this post Link to post Share on other sites
OnePostWonder 0 Report post Posted May 5, 2008 What is the type of wood they used? wat is the depth of the shelves? should be white PVC wood... depth-wise, i forgot Share this post Link to post Share on other sites
Yang Guo 7 Report post Posted May 5, 2008 Hi YG..thanks!!! Will take note of it! BTW...I intend to diy for curtain. Went to spot light and saw a metal rod that can be connected by a movable joint, which can make a L joint for L shape window. Is it advisable? HAPPY hi happy, DIY L Joint can be done..i saw my neighbour's flat done up by Tong Hong, DIY L joint done nicely but i am not sure how it is done. have you found any good idea already? HHS - Who has done theirs? What dimension & price? I was quoted a 80" non L-shape rack @ $200 i did my non L-shape rack (whole stretch across the HSS) for $200 also. $200 is their market rate i guess.. Share this post Link to post Share on other sites
h4happy 1 Report post Posted May 6, 2008 Hi YG...I wanted or rather tempted to buy at spotlight, the L joint for the bedroom. Afraid might not be able to hold the weight if cutrain half drop is used. At the L Joint area, should I drill a metal support to hold the weight? Hmmm..... hi happy, DIY L Joint can be done..i saw my neighbour's flat done up by Tong Hong, DIY L joint done nicely but i am not sure how it is done. have you found any good idea already? i did my non L-shape rack (whole stretch across the HSS) for $200 also. $200 is their market rate i guess.. Share this post Link to post Share on other sites
