tost 0 Report post Posted June 15, 2016 When I use my power drill (also borrowed from friend to make sure mine is not the cause) and run into tight spots, my RCCB and MCB (both the one with single push switch and the one with dual push switch) will trip, turning off all my electricity. So I bought a 10mA RCD plug http://www.horme.com.sg/product.aspx?id=2217 hoping no need to keep resetting the MCB. I also changed the RCCB but problem still there. But the tripping still happens. Is there any other thing I can do? Share this post Link to post Share on other sites
w7_lee 11 Report post Posted June 21, 2016 Did you use both the drills from the same wall socket? I am not an expert but maybe there is a fault in your wall socket. The other I can think of is the extension wire (if you are using). Share this post Link to post Share on other sites
Orangy 63 Report post Posted July 12, 2016 On 21/06/2016 at 3:32 PM, w7_lee said: I am not an expert but maybe there is a fault in your wall socket. This seems the more likely cause in my opinion Share this post Link to post Share on other sites
