Clarissayang 0 Report post Posted August 2, 2016 On 26/07/2015 at 2:05 PM, jimmya said: Hi all, I received this from my ID, is it reasonable? So far this is the lowest that i had got from 5 IDs. Do advice. Thanks Construct 50mm kitchen base 11.5ft - $420 Construct fridge base - $150 Construct washing machine base - $150 Supply cement, material n labour to lay 600x600 Homogeneous tiles for living room - $3360 Supply cement, material n labour to lay 600x600 Homogeneous tiles for master bedroom room - $1800 Supply cement, material n labour to lay 600x600 Homogeneous tiles for bedroom 2 - $1180 Supply cement, material n labour to lay 600x600 Homogeneous tiles for bedroom 3 - $1100 Supply labour to install 1 gallon heater - $120 Supply labour to install kitchen sink & tap on existing point - $100 Supply labour & material to lay 2” conceal drainage PVC for kitchen sink and washing - F.O.C. Design, Fabricate & Install est(11.5ft) Kitchen top cabinet in solid-ply finish with high grade EDL/LAMITAK laminate - $1495 Design, Fabricate & Install est(11.5ft) Kitchen top cabinet in solid-ply finish with high grade EDL/LAMITAK laminate - $1495 c/w Blum Hinges c/w Color polygon - all doors in ABS Trimming - 1 set of hydraulic hinge gas spring - 1 set of sand blast glass panel - 1 set of cultery tray - 1 nos.of 2 tier dish drainer - labour to install cooker hood & hob - F.O.C Design, Fabricate & Install 8ft tv console - $1040 Design, Fabricate & Install 8ft Feature wall - $1600Design, Fabricate & Install Full Height Shoe Cabinet - $850 Design, Fabricate & Install Full Height Sliding Wardrobe est 6ft - $1560 Supply Labor & Materials to construct LBOX **** area - $1120 Custom made & install 11.5ft Quartz - $1265 Fabricate & install Glass Casement door at kitchen Entrance - $550 Fabricate & Install Shower Screen casement door at master bathroom - $500 Fabricate & Install Shower Screen sliding door at common bathroom - $550 Painting of whole unit using Nippon Original Paint using 5 nos. Colors - $1250 - all internal wall with Nippon Vinilex 5000 paint - ceiling using Nippon Maxtex white color paint Corrugate Paper for Protecting Existing Flooring - $180 Whole house general cleaning - $200 Chemical Washing - $200 Total $22235. Do advice and help me out. thanks Hi Jimmya, please pm me your id contact. TIA. Share this post Link to post Share on other sites
SarahT 1 Report post Posted August 2, 2016 Hi Jimmya, may I have your ID's contact please? Thanks Share this post Link to post Share on other sites
Envzech 0 Report post Posted August 2, 2016 I had recently encountered a case where the renovation contractor causes a water pipe to burst and there is water dripping all over. So, advice all not to take it lightly and trust lousy company. I highly recommend Sigmon construction. Share this post Link to post Share on other sites
ChocolateLover 0 Report post Posted August 3, 2016 HI , can you email me the details of the ID? Angel_boyz96@hotmail.com Thanks. Share this post Link to post Share on other sites
BenTan 0 Report post Posted August 4, 2016 Hi Jimmya, please pm me your id contact. Thank you very much! Share this post Link to post Share on other sites
Dbach 0 Report post Posted August 4, 2016 Hi, can pm me the contractor details? Thanks! Share this post Link to post Share on other sites
Totoro0268 0 Report post Posted August 4, 2016 Hi Jimmya Please pm me your ID's contact & company name! Thanks! Share this post Link to post Share on other sites
jimmya 3 Report post Posted August 14, 2016 hi guys, had pm u. my photos are in thread page 10.just in case u want to see coz alot of u had ask me about my house reno. all d best! Share this post Link to post Share on other sites
dabendan 0 Report post Posted August 15, 2016 Hi guys, is this quote reasonable ? Share this post Link to post Share on other sites
buzzz 1 Report post Posted August 21, 2016 On 8/15/2016 at 9:06 AM, dabendan said: Hi guys, is this quote reasonable ? eh? thought you posted that you did 9k renovations from a renovation company le? Share this post Link to post Share on other sites
rayenxh 0 Report post Posted August 22, 2016 Hi Jimmy, Could you pm the contacts of the ID and his company? Thanks Share this post Link to post Share on other sites
Russell Cheang 0 Report post Posted August 23, 2016 Hi, can share his details too please Thank ks Share this post Link to post Share on other sites
tanks 0 Report post Posted August 26, 2016 bro, do pm me the contact details. went for quite a few ids, the price is very wide range,.. at least urs is reasonable price. thanks alot. Share this post Link to post Share on other sites
d3dys 0 Report post Posted August 30, 2016 hi, can share the ID contact to me? thanks. Share this post Link to post Share on other sites
eoeo77 0 Report post Posted September 17, 2016 HI , can you pm me the details of the ID? Thank you. 0 Share this post Link to post Share on other sites