Little Woody Home (Scandinavian 4Rm Resale Woodlands)

[Nana Chan 0]

Revised 3D for Dining Hall - Half height shoe cabinet, all column with doors. (Interior includes 5 removable/adjustable shelves with AA tracks for all columns)

Revised 3D for MBR Bathroom - Top hung mirror cabinet, full mirror instead of just middle part mirror. All casement mirror door.

Common Bathroom - No change..

Kitchen - No change

Living Swivel TV Console - No change (15.2cm/6" fixed panel for soundbar)

Edited May 19, 2015 by Nana Chan

[kyooko 1]

I really like the revolving TV wall. So cool! But I am curious about how to conceal the tv wires.

[Nana Chan 0]

I really like the revolving TV wall. So cool! But I am curious about how to conceal the tv wires.

I thought hard about that too, eventually my ID solve the problem for me.. below are the pictures he sent me sometime ago..

Wire connect from DB box to the bottom console..

The 2 pink rectangular thing is power sockets, underneath, inside the bottom console.

How my TV will be connected to the console and power socket at the bottom..

Wires will run from TV to bottom console through holes and opening inside the console to minimize any expose wires.

Hope that helps!

Edited May 19, 2015 by Nana Chan

[Nana Chan 0]

Pictures of yesterday's updates!

Our HERF Flooring up~ just need a good painter to finish up the look!

Living

Dining

MBR

Common Bedroom

Common Bedroom

Edited May 20, 2015 by Nana Chan

[Nana Chan 0]

MBR Toilet (love the transition of flooring.. )

Fix glass panel between kitchen and service yard nicely done up.. Bi Fold door also up but install wrong direction (should be open from right to left instead), told Dennis and he immediately say will inform supplier to change.

View from kitchen entrance..

Starting to see the transformation already..

Next up~

21st May - Boxing up air con trunking, water and gas pipes.
23rd May - Install 2x Common Bedroom Door (MBR door & Main door are arranged to install last to prevent chip off during carpentry installation, Kudos to that! )
25th May - Measurement for Carpentry

Painting of walls and ceilings will be done during the Carpentry fabrication.. Can't wait!

Edited May 20, 2015 by Nana Chan

[Nana Chan 0]

ID Review

Right now our reno already halfway done..

So far so good, small little hiccups along the way but we're very lucky we have Dennis who always reply to our whatsapp promptly solving our problems and provide instant clarification almost all the time.

He doesn't know I'm going to do this, but I thought he have been amazing all these while (at least up to now, pray hard he will continue till the endddd ) in helping us with coordinating with all his workers to make everything happen.. as well as his help in passing his advise on functionality issues and design (although we have quite different taste, he always respect what I want). And I can get quite demanding at times, my tone can be harsh when I wanna get things done, but he always deal with it professionally and get the problem solved.

Below are some of the screenshots I took from our whatsapp group (me, hubby and Dennis), scrolling back to our previous chat makes me feel really blessed and lucky that we have chosen him to work with our 1st home..

I've heard of stories of how some ID/Contractor are very "bo chup" and hate it when you point out very small little details and start rambling at it.. I'm quite glad that Dennis is not like that.

So far those things that I cannot accept and need him to change/do, he will get it done somehow.. and I really appreciate it alot.

Told him we want the shoe cabinet shelving to be maximize, he provide additional tier of shelves to allow self-adjustment with AA tracks.

Told him we wanna add sound bar for our TV console and he come out with a perfect way to conceal the wires and have the sound bar placed outside to maximize the sound quality..

He solve the wiring issues for soundbar.. found a good way to conceal.

Gout lines and Holes adjustments which he agreed right away to amend when spotted..

Flooring edges gap as well, as we are using Evorich HERF Flooring without skirting, need to caulk the edge of entire house to ensure no water can sip into the edges.

Some parts are missed out due to cable casing blocking it, address those areas to Dennis and he no question ask immediately agree to get someone to solve it for us.

Rubber seal at the bottom of the Bi Fold doors agreed to trim to perfection..

Edited May 20, 2015 by Nana Chan

[Nana Chan 0]

Inform us his worker going up to do plastering at the window edge for window grilles..

Also highlight to us that the window grilles design will have slight difference from the picture we show him. (End up we also cannot tell the difference )

We ask to close up gap between wiring casing and walls.. There were some tai-chi at first saying it should be electrician job, but electrician say is painter's job.

In the end after some clarification he say he will get his man to do it.

Advise us on TV brackets..

Don't laugh at this lol.. Yes he even have to remind me to buy digital ready TV..

Edited May 20, 2015 by Nana Chan

[Zio 1]

Hi can I get his your ID Dennis contact pls, thanks

[Nana Chan 0]

Updates~

Box up done~ Common Bedrooms veneer doors up!

Dining and Kitchen~

MBR~

Living~ (Note: the tiny gap on the right was patch up nicely at the end)

Last Saturday afternoon our deliveries from Hoe Kee, Courts and Heritage Gallery all came on time and rather early.. Settle everything within 2 hour+. Rip everything open to check inside before paying balance.

Edited May 25, 2015 by Nana Chan

[Nana Chan 0]

Veneer doors for common bedrooms got some hiccups, originally arrange to install on Friday 22nd but they didn't do it.

Dennis got it settled for us pretty quick and eventually it is done on 23rd Saturday, just in time for us to lock our items.

View from main entrance..

Next up will be the carpentry fabrication and painting~

Edited May 25, 2015 by Nana Chan

[djnt 0]

Hi Nana,

Mind pm me your ID's contacts and company?

TIA.

[Silvia 0]

Hi, Nana, could u pm me ur ID's contact? also searching for an ID to work on my resale flat.

thanks.

P.S. could u also share with me how much is the cost for the TV feature wall plus console (how many feet is that?).

[Nana Chan 0]

Hi can I get his your ID Dennis contact pls, thanks

Hi Nana,

Mind pm me your ID's contacts and company?

TIA.

Hi, Nana, could u pm me ur ID's contact? also searching for an ID to work on my resale flat.

thanks.

P.S. could u also share with me how much is the cost for the TV feature wall plus console (how many feet is that?).

PM-ed all~ Have a good day ahead~

[kyooko 1]

I thought hard about that too, eventually my ID solve the problem for me.. below are the pictures he sent me sometime ago..

Wire connect from DB box to the bottom console..

The 2 pink rectangular thing is power sockets, underneath, inside the bottom console.

How my TV will be connected to the console and power socket at the bottom..

Wires will run from TV to bottom console through holes and opening inside the console to minimize any expose wires.

Hope that helps!

that's very helpful. The concealment is what I thought it would be, just not sure blandness wires can fit through the swivel bit at the bottom.

Your plans is giving me an inspiration to have that in my future forever home!

Can you PM your ID to me, I'm collecting good ID / contractors, like squirrel collecting nuts!

[aroundthetown 0]

Hello!

Reno looking great!

I'm starting mine soon too, could you share dennis' contact with me?

Thanks (: