tangle 0 Report post Posted April 6, 2015 (edited) I just got my keys to the new BTO was quoted by an ID for the following and was thinking if some of the items on the quotation are too expensive or not. Any bros/sis able to advise ? Lay selected Vinyl floor finish for Living and Dining Area Construct 50mm Plinth for Kitchen Cabinet base Lay tiles for existing common toilet entrance kerb Lay tiles for existing master toilet entrance kerb Construct Shower kerb for Master & Common Bathroom Lay selected vinyl floor finish for 03 bedrooms Connect PVC drainage piping for Sink & Washing Machine inclusiveInstall 01 no of Kitchen Sink inclusiveInstall 02 sets of accessories for 02 Bathroom inclusive Installation of bidet spray inclusive False ceiling @ Entrance Foyer proposed on plan False ceiling with Light cove design @ Living Area proposed on plan False ceiling with Light cove design @ Dining Area proposed on plan Curtain pelmet 6" inch drop @ Living Area proposed on plan 20ft selected Laminated Kitchen Cabinet inclusive of the following inclusive Blum soft closing hinges inclusiveBlum Aventos HK 01 set inclusive03 sets of Blum Antaro/ Intivo series drawer set inclusive10ft Solid Surface Worktop (Selected Design) inclusive01 set selected Stainless Steel Dish Rack inclusiveInstallation of Owner's Hood & Hob inclusive Install 01sets of 10mm Tempered Glass panel c/w swing glass door for Master BathroomSupply & install x01 set of swing/slide system door consist of aluminium frame c/w 2 full acrylic door panels at Common Bathroom $400Supply & install x01 set of swing/slide system door consist of aluminium frame c/w 2 full acrylic door panels at Master Bathroom $400Paint all walls & Ceiling*up to 5 color selection for wall Lay Protection Paper for whole house Chemical washing of whole unit upon handover of unit General Cleaning for whole unit upon handover of unit Supply & install 35mm thick L900mm x H2100mm raw finish hollow core veneer room door c/w yale lever handle for 03 new bedroom doors $1350fabricate 2x additional L1200mm x D600mm bottom kitchen cabinet c/w swing door $1200* inclusive ABS side trimming for door panels color pvc proposed for all internal carcass inclusive "BLUM" anti-slam hinges for door panels Additional L1200mm x D600mm (I series) Iquartz single profile c/w H50mm backsplash Fabricate & install L2100mm x full ht tv feature panel using mdf board with front selected laminate finish $2200 Fabricate & install L2100mm x low tv console in selected laminate finish c/w front pane based on proposal layout plan $1100*(Internal Carcass : Selected grey color pvc) *(Blum soft closer hinges for door panel) *(ABS trimming door panel) Fabricate & install L1800mm x L2700mm 3"to 4" high plywood platform raise up at suggested study area $1000 Fabricate L2100mm x D600mm x H2400mm 2 door panel uv sliding track wardrobe in $ 2100* inclusive ABS side trimming for door panels * color pvc proposed for all internal carcassTotal: $27432 Edited April 6, 2015 by tangle Share this post Link to post Share on other sites
Wade322 1 Report post Posted April 7, 2015 Hi tangle. The price is a little bit high tho. Share this post Link to post Share on other sites
benetay 14 Report post Posted April 7, 2015 They need to give you a more detail breakdown of the specific line item. I was quoted 700+ for hk Aventos for Blum you can use that as one point of reference. Share this post Link to post Share on other sites
tangle 0 Report post Posted April 7, 2015 Hi tangle. The price is a little bit high tho.Thats what i thought to. Lucky i'm not the only one Share this post Link to post Share on other sites
tangle 0 Report post Posted April 7, 2015 They need to give you a more detail breakdown of the specific line item. I was quoted 700+ for hk Aventos for Blum you can use that as one point of reference.Noted. Thanks for sharing! Share this post Link to post Share on other sites