Diy Industrial Metal Pipe Curtain Rod

[vainwallfloral 0]

Hi all, would like to know if anyone knows of any place that sells metal pipe curtain rod in Singapore or knows how to do-it-yourself?

Thanks and appreciate in advance!

[Donde Fan 0]

You mean like those found in Ikea or Spotlight?

Things you need to consider

1. length of curtain

2. Weight of curtain

3. What type of curtain?

4. Day + Night?

The length and thickness of the rod and the weight of the curtain are important factor to consider if the metal will sink down over period.

I diy too. My curtain are 6kg each side, full length, living room. My rod are at least 1.7mm thick.

[vainwallfloral 0]

You mean like those found in Ikea or Spotlight?

Things you need to consider

1. length of curtain

2. Weight of curtain

3. What type of curtain?

4. Day + Night?

The length and thickness of the rod and the weight of the curtain are important factor to consider if the metal will sink down over period.

I diy too. My curtain are 6kg each side, full length, living room. My rod are at least 1.7mm thick.

Hi Donfan, thanks a lot. Do you have any photos to show me?

I am looking at this kind of rod >>>

[w7_lee 11]

Hi Vainwallfloral, did you get the picture off the internet or it is actually what you have at home (in Singapore). It looks like 1/2" galvanized water pipe and elbow (with a coat of paint).

I only cannot tell you where to get the flange that mounts to the wall.

[w7_lee 11]

Hi Vainwallfloral, did you get the picture off the internet or it is actually what you have at home (in Singapore). It looks like 1/2" galvanized water pipe and elbow (with a coat of paint).

I only cannot tell you where to get the flange that mounts to the wall.

[w7_lee 11]

Sorry for the double post, not sure why it refuse to let me edit my first post. Anyway, you can get the pipe & elbow from piping hardware shop (normally in industrial park). They can cut the pipe to your desired length. But I think it is easier with the Ikea or Spotlight off the shelve design.

[Bibliokitty 0]

Hello! I want to find this industrial pipe curtains, too. Can you please post if you find it? Thanks

[Donde Fan 0]

W7_lee is right. This is just galvanised steel pipe. Easy to get. I even seen it at hardware stores. Just buy the length and join.

I suspect Loft or so call industrial design are difficult to maintain in the long. Say 10-20 years.

[mojo1979 0]

Any luck finding the pipes? I was thinking of doing some racks with them.

[MrKangTeo 54]

Any luck finding the pipes? I was thinking of doing some racks with them.

any update?