Raydon 10 Report post Posted July 26, 2014 (edited) Kitchenthe hole is for our bosch oven..'Open' concept dish rackthe cabinet above our fridge.. a little bit too low for our liking..its about 1.85m the height is ok for the LG fridge we intend to buy.. but may have problem later on when we upgrade... should have ask them to do a it higher... Hobfound a few defects in the short time we are there... need to ask them to touch up...... overall worksmanship seems not bad... Edited July 28, 2014 by Raydon Share this post Link to post Share on other sites
Raydon 10 Report post Posted July 26, 2014 Common toilet MBR toiletinitially, we wanted white solid surface for our vanity top.. but thought it will look too blend (everything and everywhere white!!)..so we told our contractor then we may want a change of colour... any suggestions? hahaok... i shall stop spamming photos.. have a nice long weekend everyone! Share this post Link to post Share on other sites
James N Joean 8 Report post Posted July 27, 2014 Hey... what method did u employed to get the "frame" design at the perimeter of ur cabinet doors? How much more costlier is it compared to normal laminated cabinets? Thanx Share this post Link to post Share on other sites
James N Joean 8 Report post Posted July 27, 2014 Common toilet MBR toiletinitially, we wanted white solid surface for our vanity top.. but thought it will look too blend (everything and everywhere white!!)..so we told our contractor then we may want a change of colour... any suggestions? hahaok... i shall stop spamming photos.. have a nice long weekend everyone!Kompacplus. . Goodssssss Share this post Link to post Share on other sites
bianzi 52 Report post Posted July 27, 2014 Hey how big a space did u leave for your fridge since yours is beside a wall? My fridge measure 70cm but becos of the handle... When it opens I think it extended to 80 cm at least. I could not really measure that... Contractor is leaving a 85cm space... I am wondering if it will be too small Share this post Link to post Share on other sites
Raydon 10 Report post Posted July 27, 2014 Hi PTopaz,they nail/paste the frame on top of the normal flat door. the middle part is laminate while the frame is paint. disadvantage to this is that there is a chance the while paint will turn yellow. also, need to clean it frequently if not it will turn 'sticky' there is another method using laminate but i think its more expensive to do it due to wastage. a more detailed write up here... thanks to rubypumps..http://www.renotalk.com/forum/topic/65097-modern-country-at-punggol/?p=855591decide to take the risk and hope for the best because of budget.. haha... its about 125psf.. it is also one of the reason i took this contractor.. cheapest among the quotes i got...actually i like the Kompacplus.. esp the wood colour.. i think will look really well on these cabinets.. but i didnt know how resistant it is to scratches and heat.. so i took iquartz instead.. i guess should be no issue for toilet top... hahaha.. Hey... what method did u employed to get the "frame" design at the perimeter of ur cabinet doors? How much more costlier is it compared to normal laminated cabinets?ThanxKompacplus. . Goodssssss hmm.. now that u remind me.. i actually took note of this before my renovation.. but i forgot about this eventually.. now it looks like i may not have enough width to open the door fully.. hahahaha.. thats a problem.. Hey how big a space did u leave for your fridge since yours is beside a wall? My fridge measure 70cm but becos of the handle... When it opens I think it extended to 80 cm at least. I could not really measure that... Contractor is leaving a 85cm space... I am wondering if it will be too small Share this post Link to post Share on other sites
bianzi 52 Report post Posted July 27, 2014 so what was the size that the contractor leave for ur fridge? Share this post Link to post Share on other sites
Raydon 10 Report post Posted July 27, 2014 Can't remember the width.. About 83~85cm Share this post Link to post Share on other sites
Raydon 10 Report post Posted July 27, 2014 any experts can guide me here?where can i get this kind of bed frame at a more reasonable price? Share this post Link to post Share on other sites
Crystal Hoo 9 Report post Posted July 28, 2014 May I know what is the colour code for the light blue u choose (wall paint) for living room? Share this post Link to post Share on other sites
James N Joean 8 Report post Posted July 28, 2014 The wardrobe will look perfect if the door flushes all the way to the top, bottom, left and right, just like how Ikea pax wardrobe are...Not sure if it's something that carpenter can achieve ... Share this post Link to post Share on other sites
Raydon 10 Report post Posted July 28, 2014 Yeap, you are right. The door really makes a difference. It can be done, i have seen my neighbours wardrobe and they are done like that. Wanted to show you the photos but it's not good to steal other's photo. HahaSadly, my contractor said it will be additional cost, so we decide to save the $$The wardrobe will look perfect if the door flushes all the way to the top, bottom, left and right, just like how Ikea pax wardrobe are...Not sure if it's something that carpenter can achieve ... Share this post Link to post Share on other sites
Raydon 10 Report post Posted July 28, 2014 I don't have the catalogue with me.. But i know is dulux paint for this blue. Will ask my contractor and let you know... May I know what is the colour code for the light blue u choose (wall paint) for living room? Share this post Link to post Share on other sites
James N Joean 8 Report post Posted July 28, 2014 Yeap, you are right. The door really makes a difference. It can be done, i have seen my neighbours wardrobe and they are done like that. Wanted to show you the photos but it's not good to steal other's photo. HahaSadly, my contractor said it will be additional cost, so we decide to save the $$Really? Cool!! Good to know that it can be done... not sure how much additional are we talking abt....additional $30- $40 pfr? Share this post Link to post Share on other sites
Hannybal 0 Report post Posted July 29, 2014 Regarding to your MBR wardrobe access to aircon ledge,I see, was thinking what can I do to access that area easier... maybe a quick release ledge or sth. Share this post Link to post Share on other sites
