Jump to content
Find Professionals    Deals    Get Quotations   Portfolios
Sign in to follow this  
Ngan

Make Over For A 3 Room Flat @ Amk

Recommended Posts

which rain shower set u got from hoe kee?

Hi Simon, I can't remember the name and only know the model is 103.

Btw, I called up Hoe Kee and enquirer about the water pressure and if it can work well with a Joven instant heater. Was told that customers bought the same model and used with instant heaters too. And it worked well.

Unconvinced, I went to Jalan Besar and checked out other shops as well. This uncle from a corner shop (selling fans/ lights/ heaters/ taps etc) told me that those who insist rain showers must be accompanied by storage heaters are rubbish. :S He says it depends on which level you are staying and the water pressure, new house or old house, type of instant heater. Storage heater is not compulsory.

Also, there is a new type of instant heater which comes with a 'pump' and 'booster' which can increase water pressure but is 'unfriendky' to neighbors staying upstairs hehehee. So I'll go ahead and try with my existing instant heater and if it really doesn't work, I'll change to the instant heater with 'pump'. ;)

 

Share this post


Link to post
Share on other sites

Join 46,923 satisfied homeowners who used renotalk quotation service to find interior designers. Get an estimated quotation

Oh, another thing I'd like to ask fellow RTs.

Open Net

I've got the free installation from Open Net sometime back but did not subscribe to it. I am contemplating to subscribe to Open Net after the Reno is done but don't know how to go about doing it. Any bros and sis with similar experience care to share share?

Veneer doors

I'm looking for reasonable priced veneer doors to replace the existing HDB doors... Any recommendations pls?

Cheers!!!

 

Share this post


Link to post
Share on other sites

Oh, another thing I'd like to ask fellow RTs.

Open Net

I've got the free installation from Open Net sometime back but did not subscribe to it. I am contemplating to subscribe to Open Net after the Reno is done but don't know how to go about doing it. Any bros and sis with similar experience care to share share?

Veneer doors

I'm looking for reasonable priced veneer doors to replace the existing HDB doors... Any recommendations pls?

Cheers!!!

U'll need to contact OpenNet for installation schedule. First 15m @ $220, subsequent 5m @ $33.

http://www.opennet.com.sg/

 

Share this post


Link to post
Share on other sites

My contractor drove me nuts!!!

I've already got the free open net installed and he remove it! Now he ask me to go and fix it again! Omg, all kinds of swearing and cursing flying everywhere now.

I'm hopping mad!

 

Share this post


Link to post
Share on other sites

My contractor drove me nuts!!!

I've already got the free open net installed and he remove it! Now he ask me to go and fix it again! Omg, all kinds of swearing and cursing flying everywhere now.

I'm hopping mad!

OMG.... that's nightmare of all nightmares. As it is so difficult to get the opennet people. the whole thing removed.. or just removed from the wall.. but the TP and the wires still intact? if still intact... just attach it again to the wall at the right place... sign on firbre service.. get the ONT people to come in .. they will re-test the signal before deploying the ONT. otherwise there's really no way you would know if the TP is gone for good.

 

Share this post


Link to post
Share on other sites

It's gone for good... Totally gone. I don't even see the cabling around anymore.

Told him he has to take responsibility as it's his own mistake. I've told him never to remove and he forgot to inform his workers. Same case as my toilet floor tiles.

Ultimate winner of all contractors...

 

Share this post


Link to post
Share on other sites

It's gone for good... Totally gone. I don't even see the cabling around anymore.

Told him he has to take responsibility as it's his own mistake. I've told him never to remove and he forgot to inform his workers. Same case as my toilet floor tiles.

Ultimate winner of all contractors...

I don't know what to say.. speechless. You are right ...ultimate winner. Even the guys who turn up at my place to hack the house, knows to detach it from the the wall, coil up the slack, and leave the TP hanging from the ingress. You need to quickly make appt with OpenNet, pay $220 for them to relay. Insist that they start laying from the distribution point on your floor. That's what the very service-oriented OpenNet guy did for me. The staff are all very nice... the system sucks though.

 

Share this post


Link to post
Share on other sites

Hmmm, it'll be gd if u could get more info frm ur ID wrt this. Best if hv some models no. or pics. This valuable info will give others alot of alternate choices ;)

You guys might want to look at the latest alpha instant shower heater which comes with attached rain shower

 

Share this post


Link to post
Share on other sites

The contractor called OpenNet and earliest appointment is 6 months later. I already told him I don't care how but he just gotta settle it for me.

Else I'll just hold payment and make him compensate.

He just spoilt my weekend:(

 

Share this post


Link to post
Share on other sites

All tiling completed

6d6e2749.jpg

All Walls and ceilings plastered, wiring and pipes replacements also done!

c4706930.jpg

Open net issue still unsettled. Haizzz

 

Share this post


Link to post
Share on other sites

Over the weekend, I also managed to order new veneer doors to replace current old ones. Very satisfied!

 

Share this post


Link to post
Share on other sites

It's been some time. Lots happened in between:

1) contractor found his own contact to re-install Open Net at a lower cost. Whatever...

2) paint Colour all gone wrong. Only 2 colours and he could mix it up

3) ceiling fan needed a longer bar due to false ceiling drop, contractor blamed me for it (!!!)

4) lights installed but connection to switches all in wrong place

5) bedroom lights cannot be completed because bulb holder protrudes out and glass piece cannot be slided across

Lost 1kg in the past week. How nice...

Here are the photos:

Half completed

9e27ded3.jpg

LeGrand, Clipsal, Schneider (in that order). Y? Due to communication breakdown and serious coordination issues with contractor (what else is he capable of?)

499eccd8.jpg

With lights on

c12fd595.jpg

Common bathroom

f6a7655e.jpg

Master bathroom

2adfc9f9.jpg

Kinda regretted having the rack above the basin in the master bathroom. Due to space constraint, I opted for a smaller basin but didn't realize it's really that small. Gotta be careful when using the basin so I won't knock onto the rack loh... Haizzzz

Edited by Ngan
 

Share this post


Link to post
Share on other sites

Quite comforting to see my carpentry works though... And these are done today

Kitchen cabinets

9bbc6440.jpg

Feature wall

4f834dd6.jpg

7939f387.jpg

Notice the trunking above the feature wall? I'm very upset by the sight of it...

 

Share this post


Link to post
Share on other sites

Carpentry works continued on a Sunday! That took me by surprise...

Here's the 'almost completed' kitchen cabinets

03e519c1.jpg

Love the box up for the rubbish chute area

3bf9dff1.jpg

Living and dining area

beae0dfc.jpg

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×