ejzoen 3 Report post Posted June 2, 2011 (edited) Recently we have closed the third group buy for this lamp. Also since the group buy page will be expired by 31/5/11 and we are not collecting anymore orders.this page will function like info page and this thread is not a group buy page. For all of us who had part-take in the group buy, - look out here for collection details- share our installation experience- share your photos & tips and even remarks.For those who are thinking of getting ARCO LAMP, this will be a good read.if there are really many keen parties, maybe we can do the 4th Group buy on the spree page!!Introduction of ACRO Lamp in SG:I had been search this Arco Lamp in SG for the longest time, since 2009From Furniture shops to lighting shops in Geylang, to Balestier & Jln Besar, it seems that there isn't 1 of decent quality. SG mkt Price range cheapest $199, rest range ard $350-$600 but most cannot make it.Either they are steel rod with steel shades which can rust. [some showroom pcs are already rusty!!]while marble are man-made which r really cheaper, lighter & ez to crackBest 1 had seen with the most accurate reproduction is in LORGAN'S Superb quality & finishing & exact proportions going @ $950. There are those look alike with Round rods and Flat round marble base which aren't really good. Round rods are using twist tightening like those shower curtain bars. which leaves scratch marks on the steel rod. Once the scratches appear rust will follow on the same spot. this is because the protective lacquer that protects the steel from rusting is being scrap off. Round flat marble base also have problems. As the rod is tall & have a heavy cantilever force,the rods are attached onto the marble in mere 4cm contact. this will end up making the lamps wobbly. Unlike the rectangle, the rod is embedded thru-out the marble in 50cm contact & support,this makes the rod alot stronger and hard to topple. Lets hope this lamp looks good in your home & blends well with your deco. So share with us your pictures and give us inspiration!!more details of this lamp http://arcofloorlamp.com/or http://www.i-neostyle.com/goods/Light/arco_lamp/img/top.jpg Edited April 9, 2012 by ejzoen 1 Share this post Link to post Share on other sites
ejzoen 3 Report post Posted June 2, 2011 (edited) the black marble will look like this. installation details & modification possibility if ceiling is too low. Edited June 2, 2011 by ejzoen Share this post Link to post Share on other sites
mafacifa 0 Report post Posted June 2, 2011 Great. Can't wait for mine to arrive. Share this post Link to post Share on other sites
ejzoen 3 Report post Posted June 2, 2011 (edited) image from Augustonimage from wo384image from off line buyer Edited June 2, 2011 by ejzoen Share this post Link to post Share on other sites
ejzoen 3 Report post Posted June 2, 2011 Great. Can't wait for mine to arrive.remember to share your lamp picture.. Share this post Link to post Share on other sites
Sheelaa 0 Report post Posted June 6, 2011 remember to share your lamp picture..Hi hi ,I'm a little too late to place an order ..love to have on of this lamps.Please advise if there's any spare ? or anymore groupbuy coming up ..thanks a lot! Share this post Link to post Share on other sites
mafacifa 0 Report post Posted June 16, 2011 what's the status of the order? Is it shipped? Share this post Link to post Share on other sites
ejzoen 3 Report post Posted June 16, 2011 (edited) what's the status of the order? Is it shipped?wow! you are really looking forward for this, sorry to build up the anxiety. hahashipment is schedule to leave Next Week. shipment will schedule to arrive around 2-3weekswill post the collection date on this thread once i get a firm arrival date. Edited June 16, 2011 by ejzoen Share this post Link to post Share on other sites
annkhee 0 Report post Posted June 17, 2011 Nice lamp. Seen it in few show rooms before Share this post Link to post Share on other sites
tamp 0 Report post Posted July 11, 2011 any updates on delivery? Share this post Link to post Share on other sites
ejzoen 3 Report post Posted July 12, 2011 Shipment should dock on Sg anytime from today.However forwarder will only advise date of delivery once it clears custom clearance & all legal stuff.Will call u guys when stock arrive Share this post Link to post Share on other sites
ejzoen 3 Report post Posted July 15, 2011 (edited) Hi GrpBuyers!Item had arrived!! It will reach warehouse around 10-12pm today.Item is ready for collection and dates are as follows:1. Saturday 16 July From 10am - 2pm [storage charges $10]2. Saturday 22 July From 10am -2pm [storage charges $20]Instructions for collection!!1. Bring a trolley so that you can push the thing ard. cos its really heavy!! [70KG]2. U need 2 strong person that cn share the load of 35KG each.3. For those who had paid the deposit, pls bring balance payment + storage chargessCollection Address:3018 bedok north st 5 #05-21Contact person:Jonas hp: 9698 4977payment to be made to him as i may not be there on all 3 days & you may ask him for pointers for installation. Edited July 15, 2011 by ejzoen Share this post Link to post Share on other sites
ejzoen 3 Report post Posted July 15, 2011 (edited) Hi guys, i had revised our order yesterday for the following:6 qty Black marble, 10 qty White Marble [total 16 units]So there is still 1 white & 1 black spare in case more people are planning to get more.IMPORTANT NOTE FOR BUYERSjust a reminder for those in this group buy.i had some questions abt the prices from some buyers.As im a buyer like you & not making this a business, i can't really absorb biz risk,i hope you guys can understand why i'm not going to price the goods on a mark up.I'm not a trader & not drawing any profits but i can't incur too much loses as well.Cost/Rates will be made very transparent once i get them.But i'm unable to confirm the final rates at the moment. [if i have to it will be $350]as there are 4 elements which i could only finalized upon confirmation with exact quantity.however i can only explain individual costings.Lamp only Paid 30/5/11 $268/unit with bank charges- RMB1350 [previously RMB 1280, price increment due to material shortage] ~ SGD250-265 depending on FOREX each- with FOC the bulb or dimmer.+ RMB800 for additional wooden crates protection. [previously we have some damages on the marble]Shipping Paid $58.40/unit- $200~$250 per cubic depending on weight, then divided by total buyers/units.- In land transport will also be charge around RMB800.- 4 units will take up 1 cubic, there is 16 units @ d moment so cost is estimated $900 for 4 cubic- estimate SGD60+ per unit- price will only be available once Goods are pack on pallets with total Cubic & gross weightRental of space new cost +$10 if you are collecting on First Saturday, +$20 on Second Saturday- Renting space from Jonas, i will pay them $10 per pallet per day,so i estimate $10 if you collect on the 1st sat, or $20 if you collect on the second.Installation & delivery cost - Not available.- so far we do not have any cheap installer willing to charge less.- all of them asking for $150, which i thk its ridiculous.Please organize your transport for collection.Final Cost collection 16/7 SGD336.40 collection 22/7 SGD346.40 SCHEDULEweek 1 - collect depositweek 2 - order goods [we are here]week 6-8 - receive goods in SGweek 8-9 - first week collection of goods + $10 per week rental feeweek 10-11 - second week collection of goods + 2x $10 per week rental fee Edited July 15, 2011 by ejzoen Share this post Link to post Share on other sites
mangorind 0 Report post Posted July 15, 2011 May I just confirm, we will make final payment of SGD286.40 deduction from SGD50 deposit if we are collecting on the 16/7?Hi guys, i had revised our order yesterday for the following:6 qty Black marble, 10 qty White Marble [total 16 units]So there is still 1 white & 1 black spare in case more people are planning to get more.IMPORTANT NOTE FOR BUYERSjust a reminder for those in this group buy.i had some questions abt the prices from some buyers.As im a buyer like you & not making this a business, i can't really absorb biz risk,i hope you guys can understand why i'm not going to price the goods on a mark up.I'm not a trader & not drawing any profits but i can't incur too much loses as well.Cost/Rates will be made very transparent once i get them.But i'm unable to confirm the final rates at the moment. [if i have to it will be $350]as there are 4 elements which i could only finalized upon confirmation with exact quantity.however i can only explain individual costings.Lamp only Paid 30/5/11 $268/unit with bank charges- RMB1350 [previously RMB 1280, price increment due to material shortage] ~ SGD250-265 depending on FOREX each- with FOC the bulb or dimmer.+ RMB800 for additional wooden crates protection. [previously we have some damages on the marble]Shipping Paid $58.40/unit- $200~$250 per cubic depending on weight, then divided by total buyers/units.- In land transport will also be charge around RMB800.- 4 units will take up 1 cubic, there is 16 units @ d moment so cost is estimated $900 for 4 cubic- estimate SGD60+ per unit- price will only be available once Goods are pack on pallets with total Cubic & gross weightRental of space new cost +$10 if you are collecting on First Saturday, +$20 on Second Saturday- Renting space from Jonas, i will pay them $10 per pallet per day,so i estimate $10 if you collect on the 1st sat, or $20 if you collect on the second.Installation & delivery cost - Not available.- so far we do not have any cheap installer willing to charge less.- all of them asking for $150, which i thk its ridiculous.Please organize your transport for collection.Final Cost collection 16/7 SGD336.40 collection 22/7 SGD346.40 SCHEDULEweek 1 - collect depositweek 2 - order goods [we are here]week 6-8 - receive goods in SGweek 8-9 - first week collection of goods + $10 per week rental feeweek 10-11 - second week collection of goods + 2x $10 per week rental fee Share this post Link to post Share on other sites
dan2512 0 Report post Posted July 16, 2011 Collected my lamp. Thanks ej and Jo Share this post Link to post Share on other sites