blueyme 0 Report post Posted September 15, 2010 (edited) PROFESSIONAL SERVICE 1 Design consultation & space planning. $- 2 Perspective drawing on all carpentry works. $- 3 Project management & job site supervision. $- 4 Material & colour scheme proposal. $- 5 Submission of renovation permit. $- MASONRY WORKS 1 Supply & lay polish finishing homogenous floor tiles ( $3.50 ) c/w skirting as per design proposed ****, dining and three bedroom. $5,625.00 2 Provide labour to construct 2" height cabinet base w/ tiles skirting as per design proposed at kitchen. $200.00 3 Provide labour to construct 2" height shower kerb w/ tiles finishing as per design proposed at two bathroom. $200.00 CORNICES WORKS 1 Design & fabricate false ceiling as per design proposed **** & dining. $600.00 2 Design & fabricate cove light ceiling as per design proposed **** & dining. $400.00 3 Design & fabricate curtain pelmet as per design proposed ****. $120.00 4 Design & fabricate false ceiling as per design proposed at part of master bedroom. $350.00 5 Design & fabricate cove light ceiling as per design proposed at master bedroom. $250.00 6 Box-up existing recess wall area w/ plaster board finishing as per design proposed at master bedroom. $200.00 7 Box-up existing air-con pipes w/ plaster board finishing as per design proposed at master bedroom. $800.00 ELECTRICAL WORKS 1 Supply & install 27 nos of lighting point. $945.00 ( ceiling point / feature wall point / cabinet point / exclude lighting feature ) 2 Provide labour to install 35 nos of lights. $350.00 ALUMINUM WORKS 1 Design & fabricate 10mm tempered clear glass shower screen as per design proposed at master bathroom. ( sliding type ) $530.00 2 Design & fabricate 8ft(L) x 5ft(H) aluminum sliding window as per design proposed at service yard. ( colour powder coated ) $650.00 3 Design & fabricate 3ft(L) x 7ft(H) top hung sliding glass door c/w 10mm tempered clear glass panel as per design proposed at kitchen entrance. $650.00 4 Design & fabricate two nos of aluminum bi-fold door c/w acrylic panel finishing as per design proposed at two bathroom entrance. $420.00 PLUMBING WORKS 1 Disconnect existing wash basin as per design proposed at two bathroom. $80.00 2 Labour for installation of wash basin at two bathroom. $160.00 3 Labour for installation of storage heater at service yard. $120.00 4 Labour for installation of kitchen and two bathroom accessories. $220.00 5 Labour for installation of kitchen sink inlet and outlet piping. $120.00 6 Labour for installation of washing machine inlet and outlet piping. $120.00 DOOR WORKS 1 Design & fabricate 03 nos of bedroom door. ( solid nyatoh plywood door ) $990.00 CARPENTRY WORKS ( inner cabinet white PVC finishing ) Entrance Foyer & Dining Option 1 1 Design & fabricate 6ft(L) x 8.5ft(H) shoe cabinet w/ laminate finishing as per design proposed at entrance foyer. $1,440.00 2 Top up price for upgrading laminate finishing to tinted mirror finishing as per design proposed at shoe cabinet. $720.00 3 Design & fabricate 10.5ft(L) x 8.5ft(H) clear mirror feature wall as per design proposed at entrance foyer. $850.00 Option 2 1 Design & fabricate 6ft(L) x 3.5ft(H) suspended type shoe cabinet w/ laminate finishing as per design proposed at entrance foyer. $1,140 2 Design & fabricate 11.5ft(L) x 8.5ft(H) clear mirror feature wall as per design proposed at entrance foyer. $950 3 Design & fabricate 4ft(L) x 8.5ft(H) divider w/ laminate c/w glass finishing as per design proposed **** area. $1,200 Living 1 Design & fabricate 7ft(L) low height / suspended type TV console w/ laminate finishing as per design proposed **** area. $980.00 2 Design & fabricate 7ft(L) x 4ft(H) TV feature wall w/ plaster board finishing as per design proposed **** area. $490.00 Kitchen 1 Design & fabricate 29.5ft(L) suspended type Kitchen Cabinet w/ laminate and ABS trimming finishing as per design proposed at kitchen. $3,835.00 2 Design & fabricate 15.5ft solid surface work top as per design proposed at kitchen. $1,240.00 Bedroom 3 1 Design & fabricate 6ft(L) x 8.5ft(H) wardrobe w/ laminate finishing as per design proposed at bedroom 3. ( casement door type ) $1,560.00 Two Bathroom 1 Design & fabricate 6ft(L) x 2.5ft(H) vanity mirror as per design proposed at master bathroom. $240.00 2 Design & fabricate 5ft(L) x 2.5ft(H) vanity mirror as per design proposed at common bathroom. $200.00 Others 1 Upgrade whole house cabinet normal hinge to BLUM HINGE with soft-closing system. $- MISCELLANEOUS WORKS 1 Painting for whole house unit ( 4+1 wall & ceiling ) with ICI pentalite emulsion paint. $1,300.00 2 Supply & lay corrugate protection paper flooring. $300.00 3 Complete chemical wash for whole house flooring. $350.00 Any comments on the above? Any additional costs or other thing that I shd take note or factor in? Edited September 16, 2010 by blueyme Share this post Link to post Share on other sites
manutd1972 1 Report post Posted September 15, 2010 wah....they're charging u for floor protection and chemical wash? 1.3k for painting? hw big is ur plc? condo? or EA? shower kerb also a bit ex if u ask me. typical price for shower kerb is $80 per kerb. Share this post Link to post Share on other sites
Eurypylus 0 Report post Posted September 15, 2010 Your ID quote you every small bit and pieces like disconnect existing wash basin. You can try to ask for details like what wood are use in those laminated furniture... guarantee to scare you off. Do your study, for electrical wiring see the difference between parallel and ring circuit. For pipe check out Australia copper pipe with copper joint versus whatever they provide you. For furniture, ask what type of wood they use... Many ppl are like my wife that want thing that looks good at the start, but qns is how long will they last. Share this post Link to post Share on other sites
chronograph 0 Report post Posted September 16, 2010 Ya... it kind of on the steep side. Share this post Link to post Share on other sites
blueyme 0 Report post Posted September 16, 2010 (edited) Mine is a new 4-room HDB. For shower kerbs and cabinet kerbs, i am supplying the tiles and he lowered his rate to as above. What are the questions abt materials that I should ask? And what material should I go for based on this quote that he gave me since it cant be lowered any further? What should I take out from the quote and can easily pass to another person to do without repurcussion? Appreciate if can send me the contacts of reliable person to do the work also. Coz I dont want to bargain with him for discounts since he already said he tried his best already and I have already signed and paid deposit to him. Edited September 16, 2010 by blueyme Share this post Link to post Share on other sites
blueyme 0 Report post Posted September 16, 2010 Would i still need to do any wiring costs? Share this post Link to post Share on other sites
chronograph 0 Report post Posted September 17, 2010 New hdb flat is preinstalled with sockets and switches, wire lighting point. If u have no additional lighting point or sockets then it is about it. Just need to pay for installing lighting, $8 to $15 per lighting. Eg, if your ID proposed additional spot light / down light, then u have to factor the cost of running the wire and instaling the light point. Would i still need to do any wiring costs? Share this post Link to post Share on other sites
blueyme 0 Report post Posted September 20, 2010 Anyone knows if I have to top up to round the skirting top? How much wld it be? Share this post Link to post Share on other sites
Eurypylus 0 Report post Posted September 21, 2010 Anyone knows if I have to top up to round the skirting top? How much wld it be? If you are talking about slightly smooth up the edge, it should be part and parcel to the tiling works. Share this post Link to post Share on other sites
tecklok 0 Report post Posted September 21, 2010 Hi Blueyme I have been going to quite a no. of ID firm but have not find one that i'm satisfied with their design of the divider in our living room. I noticed that you have a option 2 to Design & fabricate 4ft(L) x 8.5ft(H) divider w/ laminate c/w glass finishing as per design proposed **** area. May i know whether will u be going ahead with the divider, if so, do u mind sharing the designs that your ID has propose? Thanks Share this post Link to post Share on other sites
blueyme 0 Report post Posted September 21, 2010 If you are talking about slightly smooth up the edge, it should be part and parcel to the tiling works. It's to prevent dust from collecting on top. It will be a quadrant shape. Id says will cost another $500 at least Share this post Link to post Share on other sites
blueyme 0 Report post Posted September 21, 2010 Hi Blueyme I have been going to quite a no. of ID firm but have not find one that i'm satisfied with their design of the divider in our living room. I noticed that you have a option 2 to Design & fabricate 4ft(L) x 8.5ft(H) divider w/ laminate c/w glass finishing as per design proposed **** area. May i know whether will u be going ahead with the divider, if so, do u mind sharing the designs that your ID has propose? Thanks Hi tecklok, I am not going ahead with the divider. Coz it makes the living room much smaller and without any flexibility in the future. Share this post Link to post Share on other sites
Eurypylus 0 Report post Posted September 21, 2010 It's to prevent dust from collecting on top. It will be a quadrant shape. Id says will cost another $500 at least I see your point, I was planning for no skirting due to the same possible "collect dust" issue, then my dad and my contractor keep blasting me with issue of mobbing the floor and dirty the wall. A few hundred in your case if you can take it easy should not be an issue... pay a bit more and it save you trouble for a long long time. Sometimes in life we give and take a bit lah, after spending in 10k notes... a few hundred don't feel any pain at all. Do post some picture after its done, I may copy cat the same ;-) Share this post Link to post Share on other sites
blueyme 0 Report post Posted September 21, 2010 I see your point, I was planning for no skirting due to the same possible "collect dust" issue, then my dad and my contractor keep blasting me with issue of mobbing the floor and dirty the wall. A few hundred in your case if you can take it easy should not be an issue... pay a bit more and it save you trouble for a long long time. Sometimes in life we give and take a bit lah, after spending in 10k notes... a few hundred don't feel any pain at all. Do post some picture after its done, I may copy cat the same ;-) no skirting?? hmmm.. think i will just make do with the flat skirting.. coz alot of small things that will add up and increase the reno cost.. Are you doing reno now as well? Share this post Link to post Share on other sites
Eurypylus 0 Report post Posted September 22, 2010 no skirting?? hmmm.. think i will just make do with the flat skirting.. coz alot of small things that will add up and increase the reno cost.. Are you doing reno now as well? Going to start the hacking process this week. Looking at my "things to buy" list I need to rob the bank...lol Share this post Link to post Share on other sites
