herzberg 0 Report post Posted July 6, 2010 Hi all, First timer doing some minor reno works here. I'm planning to rewire my master bedroom, e.g. add more socket points, lighting points. For the attached toilet, I intend to change the toilet bowl, basin and heater, add some shelves. All the lights and toilet stuff are bought and pending delivery. Now, the question is, should I get a plumber and electrician to do each part separately? Or should I look for a contractor to take care of both? Also, do I need to get approval/permit from HDB for the rewiring and toilet works? Share this post Link to post Share on other sites
vinder79 0 Report post Posted July 6, 2010 Hi all, First timer doing some minor reno works here. I'm planning to rewire my master bedroom, e.g. add more socket points, lighting points. For the attached toilet, I intend to change the toilet bowl, basin and heater, add some shelves. All the lights and toilet stuff are bought and pending delivery. Now, the question is, should I get a plumber and electrician to do each part separately? Or should I look for a contractor to take care of both? Also, do I need to get approval/permit from HDB for the rewiring and toilet works? Unless u are doing hacking u do not need to gat a hdb permit and if u are free to co ordinate then u should get seperate ppl but u also have to consider after installation and rewiring if your toilets leak its additional cost for u as they might not come back when u call them and if they do u pay labour and transport charges.But if u get a contractor they oversea everything any thing goes wrong u push it to them.Worst case senario is whole house gets short circuit its their fault u get it done free.Thats the benefit of a contractor anything u not happy dont be scared just tell them off.U pay for it what no free service in the world. My guy charged me $180 to change toilet bowl and basin. gallon heater $80 for installation.My electrician charges $90 1 heater point and $44 per single plug double is $65.(5 above)For shelves u can get them to just drill on for you per toilet *** $20. U can use this as a pricing guide line. Share this post Link to post Share on other sites