infinitie 0 Report post Posted August 28, 2010 (edited) I was told that the sink could not withstand the weight of the pozzi industrial tap for long, the tap will be slanted to the front sooner or later. So, I was advised it would be better to drill a hole on the table-top instead of using the existing hole, existing hole to cover up. Any advise from good ppl here??? Edited August 28, 2010 by infinitie Share this post Link to post Share on other sites
infinitie 0 Report post Posted August 29, 2010 =updates= Back of the TV feature wall - before sealing lower board. Center board will be accessible with swing cover. Incomplete TV console Share this post Link to post Share on other sites
froggy 0 Report post Posted August 29, 2010 I was told that the sink could not withstand the weight of the pozzi industrial tap for long, the tap will be slanted to the front sooner or later. So, I was advised it would be better to drill a hole on the table-top instead of using the existing hole, existing hole to cover up. Any advise from good ppl here??? is the tap v heavy? on the contrary, i was advised to mount the tap (not industrial type) on the sink instead of worktop for longer durability. Was unsure, but agreed to that suggestion anyway Share this post Link to post Share on other sites
infinitie 0 Report post Posted August 30, 2010 is the tap v heavy? on the contrary, i was advised to mount the tap (not industrial type) on the sink instead of worktop for longer durability. Was unsure, but agreed to that suggestion anyway Yes, it's heavy..i have decided to mount it on the sink after checking with my ID. His concern and mine is the same.. What if the tap is damage, are we able to get the same sized as the existing one? It's not easy to touch up on table top too, plus if there is any problem with the table top hole, it will lead to damages to whole cabinet.. Thanks Froggy!! Share this post Link to post Share on other sites
infinitie 0 Report post Posted September 2, 2010 (edited) Coming to an end of our Reno journey, left abit of touch up to be done and we are all ready to move....though we have not fix a day yet. Here are some pictures... enjoy~~ Our MBR wardrobe- It's one of my favourite laminate which i insist to have it in my house, eventually we chose it for this. Extreme left to the bathroom... Edited September 2, 2010 by infinitie Share this post Link to post Share on other sites
infinitie 0 Report post Posted September 2, 2010 TV console with swing door....pls ensure glass panel otherwise remote control cannot be detected. Front Back Back with wires to be hidden Share this post Link to post Share on other sites
infinitie 0 Report post Posted September 2, 2010 Just realized we did not take pict of the kitchen with mounted table top... Anyway, here's the cabinet with soft close hinges from "Blum". It was fixed on all cabinets, even our MBR's wardrobe, back of tv feature wall and bomb shelter feature wall as well Kitchen dish drainer Share this post Link to post Share on other sites
infinitie 0 Report post Posted September 2, 2010 Lastly.... the common bathroom. **yawn*Good night folks, hope you have enjoy the picts! Heater not fix yet Share this post Link to post Share on other sites
