Any Recommended Carpenter?

[soulfire13 0]

Could u pm me the address please..would like to take a look at the quality of this factory u mentioned

Can PM me the contacts and address of this factory please?

[jackswoods 0]

I have spoken to a couple of them at the same time as the identification and the contractors, I did not ask for the offer, but their time waste hv cos and also some who do not want. When asked about them to my flat, I'm not sure of their answer was very reno don't think so ', a marble floor and even the remote hack my ID to me for the change of the tiles. And another saying ' $ 40 to $ 50 k to $ 30 k in reno but there are enough already ' too much because a lot of this to be done to my flat is not correct.

[virus2977 0]

Hi, can I have Ah Wei's contact ?

Can pm me ah wei contact?thank you

[viv11 0]

Hi Sweetiesg,

I just remodeled my kitchen with Tony Tan of Titan Creative located at Balestier Road. Unfortunately, I don't have any pictures to offer you at this time, but he did an amazing transformation of the place. He's done many small projects for me over the years and have never been disappointed. Frankly, choosing an ID is really a matter of personal taste. I walked along Balestier and talked with almost all the IDs there before making my choice and have stuck with him over the years. What impressed me most was -

i) despite the small scale of my requirements (tv console in the living room), Tony (the boss) personally spoke to me and took the effort to understand my requirements and explain his ideas and concepts to me.

ii) personally came down to assess the area and take measurements

iii) shared very functional ideas which made full use of the space and L-shaped layout of the old point block living rooms.

He has his own factory that churns out the carpentry work so you can be assured of good quality and finish.

After sales service by Tony has been fantastic, which probably explains why I've been going back to him over and over again. He has since done another TV console for me, with a swinging section that allows me to enjoy my 42" TV at multiple angles, kitchen and toilets.

Most importantly, over the years he's been beautifying my house for me, I've come to see him more than my ID, but also a friend.

Let me know if you need pictures, be glad to send you some (just drop me a PM). You can contact Tony at 9090 3444.

Kelvin

[viv11 0]

Hi Kelvin,

Care to post me photos of your place? Also, is he a id or contractor?

viv

[mayme 0]

I want Ah Wei contact too!! Please pm mee

How's the recent feedback for Ah Wei's service?

[MingzhuAng 0]

Hi,

i would like to have ah wei contact as well. Anybody can PM me.. thanks!

[GetFuzzy 0]

Those who have not found a good carpentry contractor, you may be interested in this. Through my ID, I have visited a large carpentry contractor called My ID Factory with a 15,000 ft large factory at 10 Sungei Kadut St 2. This factory is like no other carpentry factory in Singapore and will interested anyone doing carpentry or looking for carpentry.

They make good quality furniture at local prices using large CNC German machines and specialized CAD-CAM fully integrated software to design and manufacture your cabinets. Their factory is Singapore's first European standard carpentry factory and the only one it's kind in Singapore, unlike other small carpentry factories which use simple hand table saws, making their cabinets by hand. Hand made quality differs from carpenter to carpenter and depending on their moods of the day. This factory have a huge stock of laminates and hardware in their factory; do all their ABS edging and laminating in-house, unlike most other carpenters who outsource; doing routing in-house with their Homag German CNC router; all their drawers bases are grooved and slotted with 5.2 mm laminate plywood (not PVC - this will not last compared with laminates) unlike local carpenters who just nailed a 3 mm plywood from the base which often falls out after sometime. All European drawers are grooved and slotted.

The other unique and most important thing to note about them is that they don't use those cheap poor quality white or coloured PVC plywood or slightly better painted Polykem plywood which almost all carpenters use now for cabinet interiors.  They use only HPL or high pressure laminates inside the cabinets. Polykem, a painted board do scratch, dents and give off powder-like paint particles. PVC faced plywood is even worst, they easily peels, scratches, cuts, turned yellow, cracks under sunlight, promotes bacteria growth in wood below once the very thin PVC film or sticker is damaged (that's why hospitals typically don't use PVC for their cabinet inside). Believe me... This factory makes all HPL laminate inside cabinets at PVC inside cabinet prices! What a deal! No carpenter has yet offer this before!  There are 5 standard inside colours, white, off- white, grey, black and a wood grain to choose from. For outside of cabinets like doors, they say that they have more than 750 types of laminates. I saw some wardrobes made there with inside and outside laminates the same with small increase in prices... They only 10%! I checked with my regular carpenter, they cannot do this at the price quoted or even for their 5 standard laminates inside cabinets.  

It gets better...Prices include ABS edgings for doors, all soft closing hinges and soft closing drawer slides; and for the wet areas like sinks cabinets or vanity cabinets they provide 4 pcs stainless steel soft closing hinges, something local carpenter will never include for the same price since that stainless soft closing hinges cost some $12 each.  Rusty hinges at sink and vanity cabinets are a problem now since local carpenter don't use stainless steel hinges. If you want they slaughter you with additional prices. Besides laminates, They have a full range of hardware and kitchen and wardrobe accessories like trouser racks, trays, baskets, etc. (see www.donotti.com under hardware) too!

For wardrobe, they charge 10% more for the same laminate (Donotti, Italy only) for inside and outside cabinets. Again no one has offered this before!  Homeowners don't have to a bomb for this anymore and suffer the ugly "White PVC inside" anymore.  

I understand they are causing quite a stir in the market with their product offerings and precision manufacturing facility. They are busy and i don't see them ever advertising. Probably because no carpenters or contractors have yet or can offered kitchen or wardrobe cabinets with full laminates inside and outside at PVC prices, including those soft closing hinges, soft closing slides and stainless steel soft closing hinges.

Hi John,

So did you use them for your hse? Can you share some pics of their works in your hse with us? How much did they cost you?

[5o5pm 0]

<!--quoteo(post=529958:date=May 11 2010, 02:35 AM:name=finefine)--><div class='quotetop'>QUOTE (finefine @ May 11 2010, 02:35 AM) <a href="index.php?act=findpost&pid=529958"><{POST_SNAPBACK}></a></div><div class='quotemain'><!--quotec-->Hi... just completed my reno with a contractor recommended by one of the forumer here, glad that i have choose him over the others six with six quotes tat was recommended to me too. Pricing wise my contractor is ok, reliable, good service and carpentry worksmansip is excellent and also willing to go extra miles for me. Thought that he's worth recommending to forumers...can pm me if u need he's no..<!--QuoteEnd--></div><!--QuoteEEnd-->

Hi there,could i kindly have your contractors contact?Cheers

Hi can pm me your contractor

thanks

[5o5pm 0]

I had a very reliable, experienced carpenter do some woodwork for me at my new place. My budget very tight, only about $4000 to do top kitchen cabinets, bedframe for MBR, shelvings for bedroom 2 and 3 and top study cabinets. Very happy with the service and workmanship. He even helped shore up the existing bottom kitchen cabinets bec when they were installing the new top cabinets for me the entire bottom section collapsed! Can you imagine! Apparently the previous owner's carpenter did a bad job and did not secure the bottom section properly. So there was a mini crisis and he and his men helped to tahan the bottom section and made sure they propped it up properly. Good thing they were so responsible bec the whole bottom section when it collapsed, almost ripped out the gas and water piping!

If anyone is interested in the carpenter's contact, you can PM me. His name is Ah Wei and he is popular with other forummers too. Ivy, a regular forummer here, very kindly put me in touch with Ah Wei.

Hi can please pm me ah wei's contact

thanks

[jammo89 0]

Hi.. Can I have ah wei's contact please?

[KYU 0]

Hi

Can kindly pass me Ah Wei's contact?

thanks

[jammo89 0]

can anyone pm me ah wei or mr. leong's contact please?

[deardyan 0]

<!--quoteo(post=521925:date=Apr 19 2010, 05:33 PM:name=sweetiesg)--><div class='quotetop'>QUOTE (sweetiesg @ Apr 19 2010, 05:33 PM) <a href="index.php?act=findpost&pid=521925"><{POST_SNAPBACK}></a></div><div class='quotemain'><!--quotec-->Hi all,

I'm planning to replace my kitchen solid top and do some other carpentry works. Do you have any good carpenter to recommend?

Thanks a lot<!--QuoteEnd--></div><!--QuoteEEnd-->

Hi sweetiesg, hv just pm u a contact. He has factory doing all the carpentary work. I am getting him to quote for my EM.

Cheers

Syl

Hi syl,

can u pm me the contractor number pretty please?

[arowana 2]

pls pm me the contractor's numbers also!