Ready, Steady, Go! (pasir Ris Ea)

[tigertgr 0]

ah! i just check again.. by any chance is yours a DAIKIN .. its showing 20k BTU for non inverter and 29k BTU for inverter..... For our case, our MBR is a 12k blower and our study room is a 9k blower ... Height wise its abt 2.4 meters...Maybe u have use my floor plan to guessitmate if ur current set up is enff?

[gap9699 0]

Fwah Uncle Tiger ... Nicely done !!!

So is my room ready???

[tigertgr 0]

Fwah Uncle Tiger ... Nicely done !!!

So is my room ready???

WTF are u doing here?! stop stalking me! ........... ur room is is ready.. its OUTSIDE our house. LOL

[adah 0]

Your house very big...Can play hide and seek...

[adah 0]

Shot from our study area ... Our Sycamore fans from elmarks is finally up! been looking forward to they ... only gripe was due to our false ceiling .. its a little lower then we planned.. but we can live with it.. just make sure i don't do stretching underneath them.. lol.. Btw, knowing that 1 was selling for 1380 each.. we were trying our luck when we told them if they can do 1 for 800, we will buy 2 .. if not, we are going for KDK... lol.. We bargained abit and end with 2 for 1.8k .. didnt really expected them to slash so much.. lol.. how my wallet cried.. on well.. love the looks!

Hey tiger...can I get the contact for your ceiling fans..Very nice lei..stylo mylo...

[tigertgr 0]

Hey tiger...can I get the contact for your ceiling fans..Very nice lei..stylo mylo...

hihi... ok la.. it only seems big with the kitchen push back and without furnishing.. but thank you for ur kinda words...

The agent is ELMARKS... http://www.elmark.com.sg/index.htm

Strangely the webby is not working for me....u can call 67436852 and look for Ms tan.. so far the experience with them is pretty good.. They even allow me to have 2 visits for the installation.. 1st for the installation of the bracket so my false ceiling can go up.. then they will come again after the false ceiling, plasting and painting is done..to install the fans... But do note they do charge extra for the installation....

http://www.sycamorefan.com/fan/feature/features.html

Here the webby for the product.

hope it helps

[adah 0]

http://www.sycamorefan.com/fan/feature/features.html

tiger, so far, the air circulation is ok? I mean can cover your hallway? What you think about my layout whether can cover or not?

[tigertgr 0]

tiger, so far, the air circulation is ok? I mean can cover your hallway? What you think about my layout whether can cover or not?

Hmmm... As the our switches wasn't up yet at the time when the fans were being install... I will have to get back to you on whether the circulation is ok..

But base on what we seen and felt at the Elmark's office.. the air circulation is good. its not as strong as KDK's for sure.. i think its best u head down to their showroom and have a feel and look for yourself.. As your strong and our strong might be very different in degree.

But like i said.. let me go test it on the weekend and i will post my findings..

[qezash 0]

ah! i just check again.. by any chance is yours a DAIKIN .. its showing 20k BTU for non inverter and 29k BTU for inverter..... For our case, our MBR is a 12k blower and our study room is a 9k blower ... Height wise its abt 2.4 meters...Maybe u have use my floor plan to guessitmate if ur current set up is enff?

Yep mine is Daikin. Just checked, my MBR and other room that we are likely to use the air con most often are smaller than yours. MBR will have a 12k blower also. Just height wise is higher. Hmm. Hopefully enough. Mitsubishi has higher BTU though, now that you mention..

[tigertgr 0]

Yep mine is Daikin. Just checked, my MBR and other room that we are likely to use the air con most often are smaller than yours. MBR will have a 12k blower also. Just height wise is higher. Hmm. Hopefully enough. Mitsubishi has higher BTU though, now that you mention..

ah.. i think if u are only turning on 2 at one time.. should not be too much of a problem... or u can ask the price difference between the mit and daikin? the non inverter model. if its only a couple of hundred off..that might be a better choice? Unless u are a hardcore Daikin fan.... then not much choice there..

[qezash 0]

ah.. i think if u are only turning on 2 at one time.. should not be too much of a problem... or u can ask the price difference between the mit and daikin? the non inverter model. if its only a couple of hundred off..that might be a better choice? Unless u are a hardcore Daikin fan.... then not much choice there..

Haha nah no preference over the brand really. Mitsubishi is more ex by couple of hundreds going by the coolserve webby and consumes more power but I suppose that comes with the higher BTU? Just guessing. Lol.

[tigertgr 0]

Haha nah no preference over the brand really. Mitsubishi is more ex by couple of hundreds going by the coolserve webby and consumes more power but I suppose that comes with the higher BTU? Just guessing. Lol.

Yea... its always a balance of cost of the air con unit vs the energy cost of usage.. is the saving from the air con purchase worth the energy cost it uses.. lol.. personally... we kinda gave up thinking too much .. and just chose a a newer technology one with a decent price that matches our budget .. resulting with us going with a Mit heavy industry inverter model with the new coolant gas. RAsomething lol..

[adah 0]

Hmmm... As the our switches wasn't up yet at the time when the fans were being install... I will have to get back to you on whether the circulation is ok..

But base on what we seen and felt at the Elmark's office.. the air circulation is good. its not as strong as KDK's for sure.. i think its best u head down to their showroom and have a feel and look for yourself.. As your strong and our strong might be very different in degree.

But like i said.. let me go test it on the weekend and i will post my findings..

Ya. That will help tiger. Shall wait for your report..

[tigertgr 0]

Ya. That will help tiger. Shall wait for your report..

no problemo... will update asap

[tigertgr 0]

Oh ... just want to share with every1 a webby that we found it really useful during our reno planning.. Just register an account.. (free) and u can tag pictures with your own thought , which in turn will be save for your future viewing..

We found lots of very nice reno ideas for it