fifteenmay 40 Report post Posted June 2, 2010 Not all fan need to do balancing. And by right all fans don't need to do balancing. One of the problems was due to the ceiling not level, so when installed, the center of gravity had misaligned so while "on" the fan, its start to wobbly. Then a balancing kit is require to counter it. Out of ten fans installed, only 3-4 may need to do balancing. hopefully mine doesn't need balancing Share this post Link to post Share on other sites
sfk7 0 Report post Posted June 3, 2010 can't we just ask distributors for KDK fans in singapore who are their installers and have them install the fan? btw, fifteenmay may i know where in JB did you get the fans from? Thinking of getting from there too. And there's a furniture exhibition at persada johor this weekend if you're interested Share this post Link to post Share on other sites
graceakaclouds 1 Report post Posted June 3, 2010 oic...yeah asked my hb ytd...he said yeah there's balancing kit done to balance the fan.... mine shd have...cos mine is pretty big....it's ard 48 or 50 inches blades Not all fan need to do balancing. And by right all fans don't need to do balancing. One of the problems was due to the ceiling not level, so when installed, the center of gravity had misaligned so while "on" the fan, its start to wobbly. Then a balancing kit is require to counter it. Out of ten fans installed, only 3-4 may need to do balancing. Share this post Link to post Share on other sites
fifteenmay 40 Report post Posted June 3, 2010 can't we just ask distributors for KDK fans in singapore who are their installers and have them install the fan? btw, fifteenmay may i know where in JB did you get the fans from? Thinking of getting from there too. And there's a furniture exhibition at persada johor this weekend if you're interested Hi SFK7, here is the link to all distributors in Malaysia. http://www.kdk.com.my/dealers.asp i m getting mine from Yes Electricial. They are wholesalers so just buy from them the kit then ask my id to install.i m going to jb this sunday to collect my stuff : ) Share this post Link to post Share on other sites
fifteenmay 40 Report post Posted June 3, 2010 oic...yeah asked my hb ytd...he said yeah there's balancing kit done to balance the fan.... mine shd have...cos mine is pretty big....it's ard 48 or 50 inches blades Hmm. i have to check with the jb distributor whether they sell the balancing kit or not. Share this post Link to post Share on other sites
sfk7 0 Report post Posted June 3, 2010 hey thanks. aiming for the shops around johor jaya as they say might be cheaper than taman pelangi / sentosa area. So RM560 for the sensa 5? good to have a price in mind so that wont b carrot chopped by them seeing that we're singaporeans. haha Share this post Link to post Share on other sites
coldflamez 0 Report post Posted June 3, 2010 Here is my masterbedroom wardrobe interior. Any comments much appreciated. Waa, a bit hard to see the words... anyway, seems that you will have 3 sliding doors with your layout, and likely only 1 door can be opened at a time. So you will need to align the interior layout according. Share this post Link to post Share on other sites
fifteenmay 40 Report post Posted June 3, 2010 hey thanks. aiming for the shops around johor jaya as they say might be cheaper than taman pelangi / sentosa area. So RM560 for the sensa 5? good to have a price in mind so that wont b carrot chopped by them seeing that we're singaporeans. haha Yup RM 560 for Senza 5. The cheapest quote i got from the distributore list was RM 558 and the most ex was RM 585 Share this post Link to post Share on other sites
fifteenmay 40 Report post Posted June 3, 2010 Waa, a bit hard to see the words... anyway, seems that you will have 3 sliding doors with your layout, and likely only 1 door can be opened at a time. So you will need to align the interior layout according. Hi Coldframez, you are right..2 sliding doors and only 1 door can open at a time. will block the tv as well. what do mean by align interior layout according? The picture is the interior layout... Share this post Link to post Share on other sites
fifteenmay 40 Report post Posted June 3, 2010 reserved this sink from JB. I want to undermount the sink and the sales girl say can. but i read in someone's blog that to undermount the sink, the sides need to be flat and smooth. is that so? Anyone can advise if i can undermount this sink? Share this post Link to post Share on other sites
ngunadi 2 Report post Posted June 3, 2010 You can undermount that sink but it will not look very nice and sleek as other sink. It's because of the four corners ... The idea of undermount sink is that you won't see any border (or zero reveal) but your sink in the four corners have a "ledge" and this ledge would still appear after you undermount it. Hence, it doesn't look as nice as other sink. Example of my sink ... Share this post Link to post Share on other sites
fifteenmay 40 Report post Posted June 3, 2010 You can undermount that sink but it will not look very nice and sleek as other sink. It's because of the four corners ... The idea of undermount sink is that you won't see any border (or zero reveal) but your sink in the four corners have a "ledge" and this ledge would still appear after you undermount it. Hence, it doesn't look as nice as other sink. Example of my sink ... Thanks Ngunadi! looks like i have to check with my id. we always wanted to undermount, but this sink is a good steal.. sigh.. let me check with Hubby Share this post Link to post Share on other sites
htng 1 Report post Posted June 3, 2010 Thanks Ngunadi! looks like i have to check with my id. we always wanted to undermount, but this sink is a good steal.. sigh.. let me check with Hubby Hi I have seen the shop doing undermount at the showroom. However, according to my contractor, it is not advisable despite it can be done because this is not an undermount sink. I did check with a bathroom shop near Hafary tiles shop and they say only undermount "undermount" sink.. Probably some contractor here can advise.. Share this post Link to post Share on other sites
htng 1 Report post Posted June 3, 2010 Hi I have seen the shop doing undermount at the showroom. However, according to my contractor, it is not advisable despite it can be done because this is not an undermount sink. I did check with a bathroom shop near Hafary tiles shop and they say only undermount "undermount" sink.. Probably some contractor here can advise.. Ngunadi, sorry..Sidetrack a bit. Do you use blum mechanism for your dish drainer cabinet? Share this post Link to post Share on other sites
jaskel 2 Report post Posted June 3, 2010 Hi I have seen the shop doing undermount at the showroom. However, according to my contractor, it is not advisable despite it can be done because this is not an undermount sink. I did check with a bathroom shop near Hafary tiles shop and they say only undermount "undermount" sink.. Probably some contractor here can advise.. Ya, maybe a reno consultant can advise on this... Share this post Link to post Share on other sites
