cornetto 0 Report post Posted July 26, 2007 (edited) Hi De_princess.. i was also quoted 2.8k for the whole hse, 5rm! got a shock.. i'm getting them to send me the breakdown.. can share with me your quotation?very normal mah. our resale 5-rm whole unit rewiring cost us $3075 unit prices as below:Lighting point $28 13A Single power point $3813A double power point $48 SCV point $85New telephone point $40Heater point $80Install light $8Dimmer $402-way switch $40Install Doorbell $15MDB box $300Aircon point $80 Edited July 26, 2007 by cornetto Share this post Link to post Share on other sites
Devilaz 0 Report post Posted July 26, 2007 what u had done for ur lighting point? also is ur wired connection conceal or exposed? Share this post Link to post Share on other sites
jadebell 0 Report post Posted July 26, 2007 I got the quotes..unit pricing:supply & install new wire looping lighting points (what's this??) $38supply & install 2 way switch lighting point $55labour to install ceiling fan $60supply & install scv point $110supply & install tel point $40supply & install 20a aircon point $180supply & install 13A double power point $65labour to install lighting $8labour to shift existing power point $40installation of door bell $0cornetto.. i think your pricing much better than mine... =( Share this post Link to post Share on other sites
jadebell 0 Report post Posted July 26, 2007 the lighting point includes designer switch.. Share this post Link to post Share on other sites
bernice 0 Report post Posted August 12, 2007 hi all,my house is old estate, and i having electric hob, can i request to have 15amps powerpoint? but i already have an approved aircon 15amp point already. So can additional another powerpoint right? Share this post Link to post Share on other sites
mitoev91 0 Report post Posted August 12, 2007 Must ask ur electrician to apply for permit then instil already must ask PUB to come for inspect.Total damage around $450-500 for extra 15amps point.If ur side is going through Main upgraded then no isuse otherwise must apply cos old block power loading very little unlike new flats. Share this post Link to post Share on other sites
bernice 0 Report post Posted August 12, 2007 so ex for extra permit? as my electrician gave me an quotation and i roughly go thru extra air-con pt cost abt $90. Wonder will it be $450 to $500? thanks anyway. My blk is not going any upgrading. Share this post Link to post Share on other sites
De_princess 0 Report post Posted August 13, 2007 Must ask ur electrician to apply for permit then instil already must ask PUB to come for inspect.Total damage around $450-500 for extra 15amps point.If ur side is going through Main upgraded then no isuse otherwise must apply cos old block power loading very little unlike new flats.PUB inspection not necessary right? So will be cheaper ?Mine is also old flat not main upgrading .... Share this post Link to post Share on other sites
bernice 0 Report post Posted August 13, 2007 De_princess, so did u manage to have 2 15amps power point? Share this post Link to post Share on other sites
mitoev91 0 Report post Posted August 13, 2007 If anything goes wrong then will PUB will fine you.http://www.hdb.gov.sg/bn25/isos119p.nsf/Search?OpenFormCheck ur block whether has higher loading... Share this post Link to post Share on other sites
bernice 0 Report post Posted August 13, 2007 ya electrician will apply permit to get the HDB contractor to come down and check. Share this post Link to post Share on other sites
babyQ 0 Report post Posted August 16, 2007 very normal mah. our resale 5-rm whole unit rewiring cost us $3075 unit prices as below:Lighting point $28 13A Single power point $3813A double power point $48 SCV point $85New telephone point $40Heater point $80Install light $8Dimmer $402-way switch $40Install Doorbell $15MDB box $300Aircon point $80Hi Cornetto,Can you share your electrician contact please? What is MDB box? Is it a must to change?Thank you!Cheers,BQ Share this post Link to post Share on other sites
applek24 0 Report post Posted September 29, 2007 My contractor quote me $1500 for my electrical for 4 rooms flat. but the problem is , i only shift some point here and there. I find it very ex.. but before i can say ok, he already done the shifting, can i still ask him lower down the price ? Share this post Link to post Share on other sites
nobrain1 0 Report post Posted October 3, 2007 My contractor quote me $1500 for my electrical for 4 rooms flat. but the problem is , i only shift some point here and there. I find it very ex.. but before i can say ok, he already done the shifting, can i still ask him lower down the price ?u tell him u didn't confirm and ask him why he go and shift without informing u all, then ask him to give u a breakdown of how many switches he shifted and how much is per shift. from there u will know if he overcharge. one new powerpoint socket is only $40 and $50 for a double and also includes new switches. for shifting of sockets u gotta ask cos i din do it b4 Share this post Link to post Share on other sites
renoGirl 1 Report post Posted October 4, 2007 Any latest quote from anyone? I just got a NEW EA from hdb. But the block is abt 5-6years old. Planning on rewiring the whole house. Share this post Link to post Share on other sites
