I Got 2 Pcs Of Custom Cut Ply Wood - Is It Expensive?

[ahwong 0]

2 identical pcs, about 30cm x 70cm, 18mm thick.

One side with white backing, total $20

Got it from a workshop at blk 9008 tampines st 93. He is kind enough to drill the hinge holes (35mm dia) for me..

Extremely nice after fixing..

I thought it is cheap. what do you think? I need a lot more in near future. if you have better lobang, pls share share..

Edited January 13, 2010 by ahwong

[ahwong 0]

..

Edited January 13, 2010 by ahwong

[lorddraco 1]

2 identical pcs, about 30cm x 70cm, 18mm thick.

One side with white backing, total $20

Got it from a workshop at blk 9008 tampines st 93. He is kind enough to drill the hinge holes (35mm dia) for me..

Extremely nice after fixing..

I thought it is cheap. what do you think? I need a lot more in near future. if you have better lobang, pls share share..

Hi ... I got similar size. 8.5" x 22", 3/4" thick and 4 3/4" x 16.5", 3/4" thick (Non-White backing- I donno about the price). $4 at Ban Heng Leong.

But they did not drill hole for me.

I am not sure if that is consider cheap or expensive cause also need to compare the quality of the ply.

[limlim 0]

Hi ... I got similar size. 8.5" x 22", 3/4" thick and 4 3/4" x 16.5", 3/4" thick (Non-White backing- I donno about the price). $4 at Ban Heng Leong.

But they did not drill hole for me.

I am not sure if that is consider cheap or expensive cause also need to compare the quality of the ply.

His is furniture store market rate.

i was told per foot square for 3/4 plywood is 3 dollars. So if 8.5" x 22", should work out to about 6 dollars a piece. The other piece will be about $2.25. So about 8 dollars for both. Plus drill one hole 5 dollars maximum. 2 holes works out to $18. So both actually about same price. haha.

[lorddraco 1]

His is furniture store market rate.

i was told per foot square for 3/4 plywood is 3 dollars. So if 8.5" x 22", should work out to about 6 dollars a piece. The other piece will be about $2.25. So about 8 dollars for both. Plus drill one hole 5 dollars maximum. 2 holes works out to $18. So both actually about same price. haha.

IC .. furniture store will need extra margin. I think ok ba.

[ahwong 0]

Hi ... I got similar size. 8.5" x 22", 3/4" thick and 4 3/4" x 16.5", 3/4" thick (Non-White backing- I donno about the price). $4 at Ban Heng Leong.

But they did not drill hole for me.

I am not sure if that is consider cheap or expensive cause also need to compare the quality of the ply.

I thought I have a good deal, yours even better...

dont think drilling holes is a big deal for them, standard 100mm from the edge, took less than 1 min per hole...

I will visit Ban Heng Leong...

I will go for both side with white backing... still have a few cabinet doors to make....

[ahwong 0]

Hi ... I got similar size. 8.5" x 22", 3/4" thick and 4 3/4" x 16.5", 3/4" thick (Non-White backing- I donno about the price). $4 at Ban Heng Leong.

But they did not drill hole for me.

I am not sure if that is consider cheap or expensive cause also need to compare the quality of the ply.

Ban Heng Leong is at where er?

[lorddraco 1]

Ban Heng Leong is at where er?

No 11 Syed Alwi Road

#01-07 Teck Heng Long Ind Building

Jalan Besar area!

PS: very near to a very nice/shiok beef ball noodle shop.