freddyprince 0 Report post Posted July 25, 2009 nvm...most impt u have enough space la...so what yr progress now...? thats all lor... like the piture shown,dunno todat got ppl anot Share this post Link to post Share on other sites
freddyprince 0 Report post Posted July 25, 2009 since it's done liao bobian... did u visit their showroom? it is good that u share such info with the folks here, at least they will be more aware... ya when i sign up at expo thier olso similar to like that just that the door and frame depth not so much. actually i ask them to start doing outside the beam but never expect they pertrude so much and drawer etc so short in depth Share this post Link to post Share on other sites
pinkpetter 0 Report post Posted July 25, 2009 mmm no choice ba. what's been done is done.. and they probably won't change for you also so no point fretting about it.. Everything's ready?? Share this post Link to post Share on other sites
freddyprince 0 Report post Posted July 26, 2009 mmm no choice ba. what's been done is done.. and they probably won't change for you also so no point fretting about it.. Everything's ready?? ready as in move in? nah not yet, painting not done doors all haven change, tiler haven come to tile the box, granite top not measure yet.rubbish not clear yet Share this post Link to post Share on other sites
pinkpetter 0 Report post Posted July 26, 2009 ready as in move in? nah not yet, painting not done doors all haven change, tiler haven come to tile the box, granite top not measure yet.rubbish not clear yet huh... nvm nvm.. soon soon. sounds like it's not too far. JIA YOU! *sidetrack* join FB group for RT? http://www.facebook.com/group.php?gid=104319597634 :sport-smiley-004: Share this post Link to post Share on other sites
freddyprince 0 Report post Posted July 26, 2009 nvm...most impt u have enough space la...so what yr progress now...? just went to take a look just now, nutthing is done again Share this post Link to post Share on other sites
freddyprince 0 Report post Posted July 26, 2009 (edited) huh... nvm nvm.. soon soon. sounds like it's not too far. JIA YOU! *sidetrack* join FB group for RT? http://www.facebook.com/group.php?gid=104319597634 :sport-smiley-004: haha, i got FB but i dunno how to use olso, paiseh i abit sua ku de Edited July 26, 2009 by freddyprince Share this post Link to post Share on other sites
freddyprince 0 Report post Posted July 26, 2009 guys wan to ask hor, if i wan to do lightinh under my top kitchen cabinet, as in the T5 light tube will shine onto my kitchen work top. does the carpenter need to leave a gap under the top cabinet to hid the light tube?but dun have leh dispite telling the carpenter i will be doing lightings under the top cabinet. Share this post Link to post Share on other sites
ivy 0 Report post Posted July 26, 2009 guys wan to ask hor, if i wan to do lightinh under my top kitchen cabinet, as in the T5 light tube will shine onto my kitchen work top. does the carpenter need to leave a gap under the top cabinet to hid the light tube?but dun have leh dispite telling the carpenter i will be doing lightings under the top cabinet. u got ask electrician to pull the cable or not first?? can be done both ways i guess. either recess in on fixed below the cabinet, depending on ur preference Share this post Link to post Share on other sites
stormcontrol 0 Report post Posted July 26, 2009 they can attach the light right on the bottom of the top-hung cabinets. then later attach a strip of laminated carpentry in front of the t5 to shield it from shining into people's eyes. that's what happened for mine. but you need to tell the electrician to pull the wires for it in the lego stage of the carpentry cz they need to run the wire inside the cabinets (sort of) Share this post Link to post Share on other sites
blue_diamond 0 Report post Posted July 27, 2009 BD, u paid ah soon how many percent le? me pay him about 50% liao...u? Share this post Link to post Share on other sites
blue_diamond 0 Report post Posted July 27, 2009 they can attach the light right on the bottom of the top-hung cabinets. then later attach a strip of laminated carpentry in front of the t5 to shield it from shining into people's eyes. that's what happened for mine. but you need to tell the electrician to pull the wires for it in the lego stage of the carpentry cz they need to run the wire inside the cabinets (sort of) hi Storm n ivy, thanks for passing me all the latminate catalogs... now got 7 catalog for me to choose from till PD n i but must reall say BIG THANK U ..... Share this post Link to post Share on other sites
stormcontrol 0 Report post Posted July 27, 2009 (edited) hi Storm n ivy, thanks for passing me all the latminate catalogs... now got 7 catalog for me to choose from till PD n i but must reall say BIG THANK U ..... that's why in the end i only chose from the EDL catalogue. oh yah, ask the carpenter for their take on the laminate brands also hor. My ah di got "chou2" with the boss of one of the company so cannot use their laminates (lucky not EDL =p ). Also they'll know which company's laminates better quality, easy to apply etc. PS: very smart ah u, got mention ivy jie. can escape from lol! Edited July 27, 2009 by stormcontrol Share this post Link to post Share on other sites
blue_diamond 0 Report post Posted July 27, 2009 that's why in the end i only chose from the EDL catalogue. oh yah, ask the carpenter for their take on the laminate brands also hor. My ah di got "chou2" with the boss of one of the company so cannot use their laminates (lucky not EDL =p ). Also they'll know which company's laminates better quality, easy to apply etc. hehehehe...i think some of them are quite common selection.....so it just left with a few pages of diff design n etc. so u using solid top or granite? Share this post Link to post Share on other sites
stormcontrol 0 Report post Posted July 27, 2009 hehehehe...i think some of them are quite common selection.....so it just left with a few pages of diff design n etc. so u using solid top or granite? solid top lor. done le. thinking i shud have chosen granite since in the end i chose a granite looking solid surface >_< Share this post Link to post Share on other sites
