wuga98 0 Report post Posted April 19, 2009 anyone has this experience of seeing patchy white like stains on homotiles, brushing does not removes this . Someone told be that this is chemical seeping thru' and it's normal. Can someone help verify this and how do i remove it?. Thanks. Share this post Link to post Share on other sites
PsyfaQ 0 Report post Posted April 19, 2009 I'm experiencing the same problem with my grey homo tiles... Was thinking to scrub the floor liao... Share this post Link to post Share on other sites
hihihi 0 Report post Posted April 19, 2009 homo tiles are actually same material as porcelin. so if this kinda thing happens, usually it's quite a dead end. Coz the thing is already being absorbed into the tiles. Share this post Link to post Share on other sites
wuga98 0 Report post Posted April 20, 2009 will acid washing or some kind of chemical wash will help to take this out? I tried to using pressure spray, some came out and lighten. Thanks homo tiles are actually same material as porcelin. so if this kinda thing happens, usually it's quite a dead end. Coz the thing is already being absorbed into the tiles. Share this post Link to post Share on other sites
yokine9a 1 Report post Posted April 20, 2009 Try thinner with brass wire brush. Share this post Link to post Share on other sites
wuga98 0 Report post Posted April 23, 2009 (edited) these are the pictures i took of the stains, as they are like something that is above the tiles, i am not sure if brushing will removes anything. Try thinner with brass wire brush. Edited April 23, 2009 by wuga98 Share this post Link to post Share on other sites
hello88 2 Report post Posted April 23, 2009 not sure if those squarish magic blocks would do the trick. U can try with a small portion first Share this post Link to post Share on other sites
wuga98 0 Report post Posted April 23, 2009 care to elaborate? can buy and try if you can give me more details on what this "magic" blocks is. Thanks not sure if those squarish magic blocks would do the trick. U can try with a small portion first Share this post Link to post Share on other sites
hello88 2 Report post Posted April 23, 2009 care to elaborate? can buy and try if you can give me more details on what this "magic" blocks is. Thanks its magic sponge. Original cost quite alot. U can get cheaper ones from those $2 shop like Daiso, Japan Home or neighborhood shops. Share this post Link to post Share on other sites
PsyfaQ 0 Report post Posted April 28, 2009 Tried thinner, vinegar, acid, detergent, stain remover... No luck... Share this post Link to post Share on other sites
yoongf 11 Report post Posted April 28, 2009 Such stains are associated with the calcium from the grout used to fill gaps between the tiles. It commonly occurs at granite feature wall. The cause of such stains is that there is moisture behind and is slowly seeping out through the grout. Unless the source of the moisture is resolved, this will always occur. Granite is porous material, and usually outdoor feature wall, there is always a moisture problem. Need to solve the moisture issue. If it's moisture from the front, apply sealer to the tiles. If is moisture from behind, or from the top, or from the foor.. then.. repaint, waterproof etc. This is calcium byproduct.. which only acid + scrapper can remove. Share this post Link to post Share on other sites
wuga98 0 Report post Posted April 28, 2009 yoongf: these tiles are in my balcony and they are homo tiles leh. What sort of acid should i get to get this clean put and then what sort of sealant can i apply on the top of these tiles? as the balcony is exposed to the weather, i would think it will need to sealant protection. Thanks. Such stains are associated with the calcium from the grout used to fill gaps between the tiles. It commonly occurs at granite feature wall. The cause of such stains is that there is moisture behind and is slowly seeping out through the grout. Unless the source of the moisture is resolved, this will always occur. Granite is porous material, and usually outdoor feature wall, there is always a moisture problem. Need to solve the moisture issue. If it's moisture from the front, apply sealer to the tiles. If is moisture from behind, or from the top, or from the foor.. then.. repaint, waterproof etc. This is calcium byproduct.. which only acid + scrapper can remove. Share this post Link to post Share on other sites
yoongf 11 Report post Posted April 28, 2009 I wld just use a scraper to scrape off the stains first. Then need to invesgitate the source of the moisture. If just apply sealer without understanding the source, it will make matters worse cos it will mean the moisture will run elsewhere creating other problems. The sealer I am talking about.. is meant as a stone sealer, usually for the underside of marble or granite. Is clear solution so if painted over tiles.. will not be obvious. http://www.quicseal.com/www%20-%20proposal...ve%20system.htm Check out Quicseal 117 or similar. Usually those shops that sell sand/brick also sell such products. Put it this way.. sealer on front of tile is not an acceptable building solution. This is a quick and dirty method to solve a problem cheaply. If wanna really solve it properly, need to rehack and apply sealer between screed and tile. Share this post Link to post Share on other sites