rierie 0 Report post Posted July 8, 2009 went back to our home specially to take pic of my glass cover. here u go: here's how the bedboard looks like with only the back light on do u see the glass thing covering up? to me, i dun see any difference if there were to be no glass thing. how to change tube leh? need 2 ppl - one to open from one side then pull together up. Share this post Link to post Share on other sites
rierie 0 Report post Posted July 8, 2009 glass backing - FOC after the combination of 2 mouths negotiating against 1 mouth almost fainted when i see this!!! htb insisted he wants the horizontal lines and i wanted decals. so i decided to prove him wrong that his won't be nicer than mine!!! picture speaks louder than words. this time i sure win!! :cheers: Share this post Link to post Share on other sites
rierie 0 Report post Posted July 8, 2009 happy to see that the dimmer is installed!!! least light full blown here's the switch Share this post Link to post Share on other sites
rierie 0 Report post Posted July 8, 2009 mentioned a couple of days ago that SSC came and settle my tap..here's the pic: just the back light tap tap!!! haiz...just realised that this is a stupid position for the tap. water will surely drip out when i wash my hands...haiz.... any way to counter it? Share this post Link to post Share on other sites
guy77 0 Report post Posted July 8, 2009 the lights above the bed won't need to change so often ba. once in a while need to pull up ok la. very nice effect. ur lights nice. always envied people with these lights in their home. but my house won't be able to bring out these effects in the long run. how huh? the tap? anyone can suggest. sure will splash water one lehhhh. cannot change huh? u suggested or id suggested??another choice is to find another tap that can extend to more to the centre of the basin. best if can be adjusted so it won't block the way when u wash face Share this post Link to post Share on other sites
stormcontrol 0 Report post Posted July 8, 2009 (edited) thanks for the pics of the cover rierie =). When i mentioned about this to my contractor he raised the same point as you with regards to changing the light tubes. also he said that the clear glass/plastic would not be entirely flat along my cove lighting (since when it was constructed, this wasn't part of the deal =p) so dust might still get in anyway. So in the end, i didn't do it. But thanks for sharing! Edited July 8, 2009 by stormcontrol Share this post Link to post Share on other sites
merryman 0 Report post Posted July 8, 2009 wah, your door reminds me of the sleezy hotels and for tap, just turn it on full and put your hand lower... too high and it will overflow to the sides... my parents' home is like that now.. Share this post Link to post Share on other sites
rierie 0 Report post Posted July 9, 2009 thanks for the pics of the cover rierie =). When i mentioned about this to my contractor he raised the same point as you with regards to changing the light tubes. also he said that the clear glass/plastic would not be entirely flat along my cove lighting (since when it was constructed, this wasn't part of the deal =p) so dust might still get in anyway. So in the end, i didn't do it. But thanks for sharing! no probz! wah, your door reminds me of the sleezy hotels and for tap, just turn it on full and put your hand lower... too high and it will overflow to the sides... my parents' home is like that now.. *faint* which door??? muz change liao.. tap - haiz...maybe this is the best way..at most put a cloth there and wipe it Share this post Link to post Share on other sites
merryman 0 Report post Posted July 9, 2009 no probz! *faint* which door??? muz change liao.. tap - haiz...maybe this is the best way..at most put a cloth there and wipe it the door with lines lor, you go shopping at balestier, you walk past you can see those doors le unless you change tap bah... that will be the best way Share this post Link to post Share on other sites
rierie 0 Report post Posted July 9, 2009 the door with lines lor, you go shopping at balestier, you walk past you can see those doors le unless you change tap bah... that will be the best way ya la!!! i dun like those strips. muahahahahah...now i'm thinking of reasons to convince (if not, confuse) my htb to change it to decals tap - if i were to change, then have to find one with the same size at the bottom. cuz they cut a hole in the marble for the tap Share this post Link to post Share on other sites
merryman 0 Report post Posted July 9, 2009 ya la!!! i dun like those strips. muahahahahah...now i'm thinking of reasons to convince (if not, confuse) my htb to change it to decals tap - if i were to change, then have to find one with the same size at the bottom. cuz they cut a hole in the marble for the tap hmmm, tell him it looks like those doors of sleezy hotels lor... still can try to find a better tap before you shift in wor... Share this post Link to post Share on other sites
preciousjam 0 Report post Posted July 9, 2009 ya la!!! i dun like those strips. muahahahahah...now i'm thinking of reasons to convince (if not, confuse) my htb to change it to decals tap - if i were to change, then have to find one with the same size at the bottom. cuz they cut a hole in the marble for the tap try your best to come my house on sat...though i have not put up decals on my glass but he can see the decals i have and hopefully that will change his mind... Share this post Link to post Share on other sites
stormcontrol 0 Report post Posted July 9, 2009 hmmm, tell him it looks like those doors of sleezy hotels lor... still can try to find a better tap before you shift in wor... my wife wanted to frost the entire piece of glass for our kitchen door. i told her no, cz ppl on both sides of the door cannot see through very dangerous, so my carpenter initially gave us the idea to put clear lines at eye level. Now that i think about it, doing it this way will only benefit adults, kids won't be able to see, so i was thinking of changing the design to alternate stripes of frosted and clear, something like rierie's door. but now you guys look like hour-rate hotel doors... Share this post Link to post Share on other sites
familyof4 0 Report post Posted July 9, 2009 how abt frosted only at the middle? like the body part of the glass? Share this post Link to post Share on other sites
merryman 0 Report post Posted July 9, 2009 my wife wanted to frost the entire piece of glass for our kitchen door. i told her no, cz ppl on both sides of the door cannot see through very dangerous, so my carpenter initially gave us the idea to put clear lines at eye level. Now that i think about it, doing it this way will only benefit adults, kids won't be able to see, so i was thinking of changing the design to alternate stripes of frosted and clear, something like rierie's door. but now you guys look like hour-rate hotel doors... that's how they do it mah use decal nicer Share this post Link to post Share on other sites
