yapyap 0 Report post Posted March 3, 2009 All i see on website are brochures pictures.. the pictures of the switches have word clipsal on it while my contractor tells me mine is clipsal zencelo but it doesn't have the brand on it.... so im worried about foul play here. anyone uses that light switch. can snap a pic for me to see? Share this post Link to post Share on other sites
SunkistC 0 Report post Posted March 11, 2009 Here are the actual Zencelo Switches: Top Left: 1 Gang Switch Top Right: Water Heater Switch Bottom: 2-way Power Socket All switches/socket have "Clipsal" brand label at the bottom. Share this post Link to post Share on other sites
pinkpetter 0 Report post Posted March 11, 2009 wah nice le. very flat... mm so yapyap, does that mean yours is not? Share this post Link to post Share on other sites
yapyap 0 Report post Posted March 11, 2009 (edited) Thanks Sunkist....... PP, not sure, I need to go and check again! btw, Sunkist, yours look very thick for the base and the base doesn't look symmetrical to the casing.. if you look the pic i attached in the first post, that should be how zencelo base looks like.. mine looks like the pic.. just that i think no logo.. and i found this on the malaysia renotalk webby Edited March 11, 2009 by yapyap Share this post Link to post Share on other sites
ordix 0 Report post Posted March 11, 2009 (edited) zencelo white your pic shows bronze color one. SunkistC's zencelo is mounted on expose Kbox (i cant rem the actual name) thats why u see a thick base. Edited March 31, 2009 by ordix Share this post Link to post Share on other sites
SunkistC 0 Report post Posted March 12, 2009 Hi yapyap, Ordix is right.. the pic attached in your 1st post is only the Zencelo Switch itself only. For new houses where wires are hidden and switches are mounted directly onto the wall without the base, yes it will look like your 1st post pic... But my house is a 33 yrs old HDB flat, so all switches have the base.. Let me show you... On the left is a commonly available base, on the right is a 2 Gang Switch still wrapped in its original packaging.. Switch unwrapped and resting on the base.. Reverse side of the Switch.. Close-up of the Switch, can see the Clipsal Brand Logo.. Share this post Link to post Share on other sites
jemjem 1 Report post Posted March 12, 2009 jus curious, is this switch very gd or? Share this post Link to post Share on other sites
SunkistC 0 Report post Posted March 12, 2009 Think aesthetic wise is nice, and it's not as noisy as those big rocker switch with a loud "tick..tuck" sound... Price wise 1 gang switch is about $6.40, 2 gang switch is about $9.63.. Share this post Link to post Share on other sites
yapyap 0 Report post Posted March 12, 2009 ok. got you, thanks. ok.. i was mistaken, mine does have the logo.. it is easily miss without looking at it clearly.. ya..i think aesthetically it is nice. One problem i have is that if you use it as a 2 way switch, the led wouldn't light up.. i was told that they dont have 2 way switch that would light up. Secondly, the switch get stuck quite easily if not installed properly... so need good installer i think.. Share this post Link to post Share on other sites
ordix 0 Report post Posted March 31, 2009 ok. got you, thanks. ok.. i was mistaken, mine does have the logo.. it is easily miss without looking at it clearly.. ya..i think aesthetically it is nice. One problem i have is that if you use it as a 2 way switch, the led wouldn't light up.. i was told that they dont have 2 way switch that would light up. Secondly, the switch get stuck quite easily if not installed properly... so need good installer i think.. ya my electrician spoiled few of my zencelo switches (claimed its factory fault), I brought back to Choo Chiang, ppl there very nice, exchange 1 to 1. 2 way switch as in u click 1 time control 1 light and 1 more time another light or? i got 2 switch controlling 1 light, works ok for me though. Share this post Link to post Share on other sites
yapyap 0 Report post Posted April 10, 2009 ya my electrician spoiled few of my zencelo switches (claimed its factory fault), I brought back to Choo Chiang, ppl there very nice, exchange 1 to 1. 2 way switch as in u click 1 time control 1 light and 1 more time another light or? i got 2 switch controlling 1 light, works ok for me though. i mean click one time on switch A to switch on light A. Walk to switch B be and click to switch off light A again. hi ordix, Yours work ok means the LED will light up when you switch on light A on switch A and the LED at switch A will go off if you switch off light A at switch B? Share this post Link to post Share on other sites
br0wnskinnedb0y 0 Report post Posted May 4, 2009 Where can we get these switches? Share this post Link to post Share on other sites
blackcar 0 Report post Posted June 29, 2009 i mean click one time on switch A to switch on light A. Walk to switch B be and click to switch off light A again. hi ordix, Yours work ok means the LED will light up when you switch on light A on switch A and the LED at switch A will go off if you switch off light A at switch B? hi mine also having the same problem for the 2 Gang 2 way switches, both LED didnt light up at all. Did u resolve yrs? Share this post Link to post Share on other sites
DKCH 0 Report post Posted June 30, 2009 Wow, this looks NICE! And I was just at Choo Chiang yesterday getting the grey LeGrand switches. Hmm, this is nice... Share this post Link to post Share on other sites
blackcar 0 Report post Posted June 30, 2009 hi mine also having the same problem for the 2 Gang 2 way switches, both LED didnt light up at all. Did u resolve yrs? Ok find out from my supply that 2 way switches no led light on. Strange but is true!!! Share this post Link to post Share on other sites
