assertives

Curtains will be mounted on the ceiling behind the sliding doors (yellow arrow) and I'm thinking of building a curtain pelmet in front of the curtains after they are mounted to mount the aircon on this pelmet so the aircon can sit on this side of the room instead of routing through my wardrobe and sit on the wall behind the bed. I will leave the trunking that is running through the wardrobe alone but will pull out all the pipes inside it.

Hi guys! I'm late to this thread. Finally created an account to post here after lurking on and off over the past few years. I haven't had much luck getting a good bto number after several tries so I ended up getting a resale unit earlier this year. My reno started in early Oct and it's about to be completed. Though along the way there have been quite a few bad planning, mistakes and hiccups. Anyway, I am currently facing abit of a issue and wondered if anyone has any input to share. So, I hacked off the wall seperating the living room and the bedroom and installed sliding glass doors with the tracks running through a partial partition wall built down from the ceiling. Curtains will be installed on the ceiling in front of the sliding doors. Now I'm facing abit of a dilemma on where I should mount my spilt unit aircon. I sealed the bedroom entrance to the toilet to build a wardrobe along that wall. The plan was initially supposed to have the aircon mount next to the wardrobe on this wall but turns out there's not enough space, so my aircon ended up moved to the wall above the bed facing the sliding doors with the aircon trunking running through the entire length of my wardrobe. I'm really not very comfortable with this as in the event the aircon leaks and also pipe sweating could damage my carpentry. I'm looking to see if I can move the aircon to the partition wall facing my bed but because the curtains needed to mount on the ceiling, the aircon unit will be in the way. I was wondering if I could build a curtain pelmet and then mount the aircon unit on this pelmet instead. I have attached a picture of how my aircon is mounted at the moment and also a picture of what I'm thinking of doing with mounting the aircon on a curtain pelmet in front of the curtains. Anyone has any idea?

Hi guys, have a question regarding where to mount my split unit aircon. So I hacked away the wall that seperates my living room and the master bedroom and installed sliding glass doors in its place under a partial partition mounted from the ceiling. The plan was to then install curtains on the ceiling Infront of the sliding glass doors. The glass doors and curtains faces my bed. Now I want to mount my spilt unit aircon on this same side (i.e. facing my bed) but since the curtains are being installed on the ceiling, I cannot mount the aircon on the partial partition where the sliding doors were installed under as the curtains will be in the way of the aircon. I was wondering if it's possible to build a curtain pelmet in front of the curtains and then mount the aircon unit on this pelmet instead? Something like this but not at the window area.