duomaxwell

Hi t14388, So sorry, we couldn't give you any advise on the questions you posted as we didn't go and find out from our ID which model will be used for our dish rack door and we also left the power factor calculation to our ID.

Hi diamondsmum, we got our curtain from Vincent (Garvin Marting Services) Hp: 9three849228 and he quoted us $1400 for 5 sets of day & night curtains (Living room & 4 rooms)

Hi t14388, If you refer to the picture bottom (on the bottom left), you can see that the 1) LED strip surrounding our tv for our tv feature wall is operated by a switch (controlled by a LED driver) (C3 LED strip) 2) 2 LED strips for the open shelves are controlled by one LED driver (C1 LED strip) - connected in series 3) 2 LED strip for top & bottom display cabinets are controlled by one LED driver (C2 LED strip) - connected in series Our Philips LED strips are not dimmable. Hope all the above description asks your questions

Hi stray, Really glad that the posts are helpful to people The window grills are dark green in colour as we understand there is a need to match the colours of our bedroom window grills

Hi, PM Sent

Hi Raakesh, PM Sent

Hi Edger03, PM sent

Hi osiris7777, Thanks thanks. Sure. PM Sent.

Hi ixidus, Your mailbox is full

Hi Johnson, Maybe your contractor can come up with something even better to support your sink

Hi Johnson, Initially our blanco sink is just supported by the 20mm edge all around. From the drawing above, it illustrate for the carpenter to open a opening of length (840mm) & breath (480mm) (Actual sink dimension is 860mm (Length) & 500mm (Breath)). So the support for the sink is the groove (20mm on top, 20mm on bottom & 20mm on both sides) We were worried that over time, the carpentry might not be able to support the weight of the sink as it is quite heavy (Even though he mention that this installation method is common for under-mount sink). So we asked our ID whether we can have more support for our sink and he did a stainless steel support for our sink (FOC ). Below is the photo of the stainless steel support below our sink.

Even though we brought from Malaysia, Tampoi Lighing is providing 1 year of warranty (I forgot whether it is 2 or 1 year warranty). its just that we will need to dismantle the fan and bring it into Malaysia to claim for the warranty if its faulty. Just note on the need to get the pots & pans which are suitable to be used for induction cooker hob

We are using induction hobs. Yes, there are only 2 "burners" we are using Bosch. Yup. its so much easier to clean compared to gas hobs.

PM sent

Hi trcd, Actually our toilets are not really spacious. Its just that we don't want to waste money since we already paid for the doors, so we will just keep using the doors until it gives us problem. Currently for our master toilet, when there is somebody using the sink to wash hand and the door is closed, there is a need to be careful when somebody from outside is trying to open the door. I think there wouldn't be this issue if we changed to a bi-fold door. We got our living room ceiling fan from Aeratron model AE3 http://aeratron.com/ourrange/

Hi trcd, You mean this side of the master bedroom wardrobe? If yes, there are 2 purpose for the black groove lines, 1) aesthetics 2) to "hid" the "hidden" door so that the small door (to place my wife's handphone as she always use it as her alarm) is not obvious when the door is closed. Which doors are you referring to? Toilets? Bedrooms? If you are referring to Toilets & Bedrooms, we are using the doors provided by HDB.

Hi teegz, We don't need to remove the top of the dishwasher coz there is no "top" to begin with Our model is designed to be in build into cabinet, think that's why there is no "top".

Hi AndrewA, I am just glad that all my posting can be of some help to all new home owner's renovation.

lots of our friends were also awed by them during our house warming. Haha

Hi teegz, If you refer to the 2D drawing above, the height of our kitchen cabinet is 810+50(cement base) = 860mm. The area whereby we placed our dishwasher does not have any cement base (Refer to picture below) If you refer to Bosch dishwasher installation guide (Below), the height of the dishwasher is adjustable (815 to 875mm). As such, we adjusted the dish washer to a suitable height so that the bottom kitchen cabinet can stay at the height of 860mm. The height of the dishwasher can be adjusted with a screw driver and a spanner. Not sure of your brand of dishwasher. For us, we asked the bosch sales person who sold us the dish washer and he advised us on the above. We brought ours from courts and the bosch sales personnel from Tampines Court Megastore was very knowledgeable and advised us on all these. Our ID and carpenter made a special trip to Tampines Courts Megastore to test out and make actual measurement of the dishwasher before the fabrication of the kitchen carpentry.

Hi t14388, 1. PM sent for the cost per feet for sliding door wardrobe 2. the hardware used for our living room TV console door is blum. It's nothing special, its just a normal hinge used for all our cabinet doors as well. So sorry, i don't have any part no for this hinge.

Hi evangel, Nope. we don't have to top up for Odour-less easy wash. Our ID does not limit us on the selection of paint types, that's why we purposely chose the most expensive series. Yup, you are right, usually I think others are only being offered Vinilex 5000, need to top up if using other range of paints if I am not wrong

The following are the final line by line description of our renovation works for reference S/n A Living/Dining/Bedroom 4 1 To design & construct false ceiling w/ cove lighting effect 2 To design & construct est. L 12.5ft full ht partition wall using gypsum board 3 To supply & install normal wooden door frame 4 To design & construct est L 8.5ft suspended Tv console using solid-ply laimate c/w internal polyester 5 To supply & install semi solid veneer door w/lever handle & hinges 6 To design & construct est L 3ft full ht display cabinet using solid-ply laminate c/w glass door (max 10pcs glass shelving) 7 To design & construct est L 6.5ft full ht cabinet using solid-ply laminate c/w partial open shelve 8 To design & construct est L 3.5ft full ht feature wall using solid-ply wooden frame open shelve (FOC upgraded) 9 To design & construct est L 5.5f settee bench w/storage using solid-ply laminate 10 To design & construct est L 5.5f half ht backing using solid-ply laminate (Ht 750mm) 11 To design & construct est L 5.5ft craftstone on top settee backing c/w chalkboard paint (labour to lay craftstone only) 12 To design & construct L 8.5ft full ht Tv feature wall using solid-ply laminate boarder (labour to lay craftstone only) 13 To design & construct est L 6.5ft craftstone on full partition wall (labour to lay craftstone only) 14 To supply labour to install skirting B Kitchen / Service Yard 1 To supply labour to hack est L 8ft full ht existing wall (Subject to HDB Approval) 2 To supply labour to dismantle existing folding door, window & hack est L 4ft half ht existing wall 3 To supply labour to make good damaged area (plaster smooth wall - FOC) 4 To design & construct est L 7.5ft half ht parition wall with wood support using gypsum board (sliding door) 5 To supply & construct kitchen cabinet base & washing machine base 6 To design & construct est L 11ft top & 14.5ft btm kitchen cabinet using solid-ply laminate 7 To design & construct est L 4.5ft full ht cabinet using solid-ply laminate c/w internal polyester 8 To supply & install est L 14.5ft kompacplus work top on top of kitchen cabinet 9 To supply & install est L 7.5ft kompacplus backing in between top & btm kitchen cabinet 10 To supply & install est L 7.5ft kompacplus backing on top of kitchen cabinet (est H 1700mm) 11 To supply & install est L 4ft half ht fixed clear glass panel using 10mm thick tempered glass 12 To supply & install 10mm thick tempered sliding glass door 13 To design & construct est L 7.5ft bar counter using solid-ply laminate (Ht 1000mm) (2sided finishing) 14 To Supply & install est L 7.5ft kompacplus work top on top of bar counter 15 S1 x 4 units, S4 x 7 units, I3 x 2 units & I6 x 4 units I Anti slam drawers II Anti slam hinges III Stainless Steel Dish rack IV To install cooker & cooker hood V Internal polyester C Master Bedroom 1 To design & construct false ceiling w/cover lighting effect 2 To design & construct est L 12 ft full ht wardrobe suing solid-ply laminate c/w internal polyester 3 To design & construct est L 6 ft suspended Tv feature wall using soild-ply laminate (1200m ht) 4 To design & construct est L 2.5ft full ht partition wall using gypsum board 5 To design & construct est L 2ft full ht Tv console using solid-ply laminate 6 To extend clear mirror to 3ft full ht (FOC) D Bedroom 3 1 To design & construct est L 5.5 ft full ht wardrobe using solid-ply laminate c/w internal polyester 2 To design & construct est L 7 ft suspended study table using solid-ply laminate 3 To design & construct est L 3 ft top hung cabinet using solid-ply laminate 4 To design & construct est L 1 ft full ht partition wall using gypsum board E Bedroom 2 1 To design & construct est L 6 ft full ht wardrobe using solid-ply laminate c/w internal polyester 2 To design & construct est L 2 ft dresser table using solid-ply laminate c/w internal polyester 3 To design & construct est L 2 ft full ht partition using gypsum board F Master Bathroom 1 To supply labour to dismantle existing bathroom accessories (FOC) 2 To Supply & install 10mm thick tempered clear glass shower screen (Ht 1900mm +/-) 3 To design & construct est L 5.5 ft suspended vanity cabinet 4 To supply & install est L 5.5 ft kompacplus on top of vanity cabinet 5 To design & construct est L 5.5 ft suspended mirror cabinet using solid-ply laminate c/w mirror (1200mm ht) 6 To supply & install ventilation fan G Common Bathroom 1 To supply labour to dismantle existing bathroom accessories (FOC) 2 To design & construct shower curb w/ tiles finishing 3 To design & construct est L 2.5 ft suspended vanity cabinet using acrylic 4 To design & construct est L 2.5 ft suspended mirror cabinet using solid-ply laminate w / mirror (1200mm ht) 5 To supply & install shower screen using 10mm thick tempered clear glasss (L-Shape) 6 To supply & install est L 2.5 ft kompacplus on top of vanity cabinet 7 To supply & install ventilation fan H Miscellaneous works 1 To paint whole unit interior wall using NIPPON / ICI paint (no limit of colour) 2 To lay cardboard protection for working areas 3 To chemical wash the whole unit 4 To clear & discard debris I Professional Services 1 Design Consolation 2 Space planning 3 3D perspective & detail drawings 4 Material & colour proposal 5 Site Management / Project management To provide internal polyester or high rated PVC for all carpentry internal storage To provide blum soft closing runner track for all drawers To provide soft closing hinges & AA track for all the carpentry

Following are few more photos taken for sharing as boon has requested Master bedroom Master Bedroom Toilet Bedroom 2

Hi boon, Thanks for the compliments. PM sent