Mon56

Yeah, I've found out haulage fee is supposed to be around $215 and provided by city council but It was the post on 2007 on this renotalk so I'm not sure what is the current price now. Bathroom item such as W.C, Sink, etc

Hi All, I've been through all the renovation forum included Renotalk and Hardwarezone, but I'm still having a little bit confusion with the quotes as I can see they playing around with the prices (lower one things and raise the other). With that said following is my quotation from my ID or contractor. Please share with me your experience and insight. ID HACKING, HAULAGE & PRELIMINARY WORKSHack Existing Floor Finishes at 2x ToiletsHack Existing Wall Finishes at 2x ToiletsHack All Existing Gypsum Board & Door Frame **** AreaHack Existing & Dispose 2x Ledges **** AreaHack Existing & Dispose Wardrobe at Master BedroomHack Existing & Dispose Glass Sliding Door Master BedroomHack Existing Built-in Basin at KitchenHack & Trim Existing Wall Between Common Toilet & KitchenDismantle 2x Ceiling FanConstruct New Wall using Hollow Block to Seal Up Previous Common Toilet Entrance w/ Cement SmoothSupply & Laying Corrugated Paper (Single Layer) as Floor ProtectionHaulage of New & Raw MaterialsClearing of DebrisTotal Hacking, Haulage & Preliminary Works Cost :$3,500.00WET WORKSMASTER TOILETSupply & Lay Homogeneous Floor Tiles$580.00> Selection of Tiles: Up to $3.00 psf / Up to 300x300mm> Includes: WaterproofingSupply & Lay Ceramic/Homogeneous Wall Tiles $ 1,750.00> Selection of Tiles: Up to $3.00 psf / Up to 300x600mm> Excludes: Border/Special TilesConstruct Tiled Cement Door & Shower Kerb$240.00 COMMON TOILETSupply & Lay Homogeneous Floor Tiles$550.00> Selection of Tiles: Up to $3.00 psf / Up to 300x300mm> Includes: WaterproofingSupply & Lay Ceramic/Homogeneous Wall Tiles $1,600.00> Selection of Tiles: Up to $3.00 psf / Up to 300x600mm> Excludes: Border/Special TilesConstruct Tiled Cement Door & Shower Kerb$240.00LAMINATE FLOORINGSupply & Install 8mm SUPREME Laminate Flooring at Master Bedroom (Includes: Skirting) $800.00CEILING WORKSConstruct False Ceiling w/ False **** & Master Bedroom $1,200.00PAINTING WORKSPainting Works for Whole Unit $1,600.00> FULL RANGE of Paints from DULUX/NIPPONApply Sealer Before Painting $500.00PLUMBING WORKSSupply & Connect Single Stainless Steel Piping for 2x Toilets (for HDB Exposed Piping Only)Supply Labour to Install 2 sets of W.C. BowlSupply Labour to Install 2 sets of Wash BasinSupply Labour to Install 2 sets Toilet AccessoriesLabour to Install 2 sets of shower Head SetLabour to Install 2 sets Bathroom Bidet SprayLabour to Install Storage Tank HeaterSupply & Connect 2x Hot Water Points from Storage HeaterTotal Plumbing Cost :$1,500.00OTHER WORKSSupply & Install 10mm Clear Tempered Glass Shower Screen at Toilet (L1500mm x H1800mm) (1 Fix & 1 Swing)$400.00> Exclude: Over Head Supporting Bar for Shower ScreenSupply & Install 10mm Tempered Clear Glass as Fix Panel at Common Toilet $150.00Supply & Install Bi-Fold Door at 2x Toilets (Aluminum Frame w/ Acrylic Panel)$500.00Washing of Whole House$450.00Total before GST:15,060.00GST 7%:1,054.20Total after GST:16,114.20 CONTRACTOR A Demolition Works 1 HDB Renovation Permit Application & Processing F.O.C. 2 Demolish a doorway permit F.O.C.3 Hack a doorway at common toilet 300 4 Hack existing wall tile at 2 toilet 6005 Hack existing floor tile at 2 toilet 500 6 Hack existing skirting at main bedroom 1507 Dismantle existing partition at future room 350 8 Remove existing toilet bowl,basin & door F.O.C.9 Dismantle existing vanity at kitchen 150 10 Dismantle existing wardrobe & aluminiun sliding door at main toilet 300 Sub-total 2350 B Masonry Works 1 Labour to construct hollow block to seal existing doorway at common toilet 4802 Labour to make good existing skirting at main bedroom 200 3 Supply & lay wall tile to make good existing vanity area 3004 Supply & lay wall tile to make good existing common toilet 650 5 Supply & overlay laminate flooring c/w skirting at main bedroom 9506 Supply & lay ceramic wall tiles till ceiling height at 2 toilet 2400 7 Supply & lay non slip homogeneous floor tiles at 2 toilet 10008 Supply & lay waterproofing membrane at 2 toilet 400 9 Construct 2 nos, shower kerb 160 Sub-total 6540 C Ceiling Works 1 Supply & install false ceilling **** 7002 Supply & install false ceilling at main bedroom 850 Sub-total 1550D Plumbing Works 1 To run copper piping for 2 toilet (Cold water) 880 2 Labour to install bathroom item 7503 To run outlet pvc piping for 2 toilet F.O.C Sub-total 1630E Door / Glass / Windows 1 Supply & install 1 nos sliding tempered shower screen at common toilet 7502 Supply & install 1 nos swing tempered shower screen at main toilet 550 3 Supply & install 2 nos,aluminium bi-fold doors at 2 toilet 500 0 1800 F Painting Works 1 Paint whole house exposed wall & ceiling with ICI/Nippon emulsion paint 10002 Varnish/Paint all doors, door frames & exposed pipes 300 Sub-total 1300G Miscellaneous Works 1 Whole house chemical wash 2802 Provide haulages & debris clearing services 550 3 Lay protection sheet at affect area F.O.C Sub-total 830 H Electrical Works 1 Electrical aprox 500 Sub-total 500 Total 16500

Hi All, I'm in the big dilemma right now due to the huge variety of the mattress, I've tried various type of mattress ranging around $2000 and it's just feels the same like any other normal bed but when I've tried those ranging from $3000 and above you can really tell the difference especially this bed Dunlopillo Elizabeth which costed $3800 for the king size which really way beyond comfortable. My question is, is it worth it to invest that much for the mattress and Any review regarding this Dunlopillo Elizabeth? Because when I've tried to google it, I've discovered those post dated on 2010 and 2013 whereby all the Dunlopillo mattress is start sagging within 3-4 years time. Please share with me your expertise and knowledge. Thanks