xiaogary

Each ballast one brown one blue wires regardless of position? Meaning blue and brown can swap around at the ballast? Then my ceiling wires 1 brown, 2 blue, 2 green? I need to use all 5 or only 3? If only 3, the other two just black tape to insulate them? The 3 wires/5 wires connect to the 3 white connector's opposite side?

I like Fujioh 793. Safety valve not an issue since I will be there when cooking. One side spacious for wok cooking, the other 2 on right side can be for small cooking. The center space can be used to put hot pot too (big enuf) compare to the one with 3 stove evenly spaced out. Took the white Fujioh 890 hood as well, the noise level is much lower if you compare with the normal stainless steel one.

Dear forumers, I intend to diy my own lighting connection using existing HDB lighting points that comes default. However, the light I got was not wired internally. So I wish to seek some guidance on how to connect the wires to the ballast. Also the lights never comes with the starter or capacitor (bring home then realise). Also wondering why some points comes with 5 wires (2 blue, 2 green/yellow and 1 brown) and some comes with 3 wires (1 blue, 1 green/yellow and 1 brown). Should I use one of the blue and one of the green/yellow or twist both blue together and twist both green/yellow together? Hope this discussion may be helpful to me and other low budget forumers who intend to diy also. Thank you.