steven0505

how many cabinets you have, the total length in 8FT, I guess the total cabinets size will not exceed 6 cabinets. Right?And what kind of door panle finish? It is melamine or laminate or PVC?

If you want the door panel look unify, if your kitchen door is in veneer finish, the veneer edge banding is the best finish. The pvc or abs are also a good option, as normally the veneer thickness is 0.3-0.5MM, but the PVC or ABS could reach 2MM, so PVC or ABS is much endurable. Another think, if you ask which one is eaisly peel off, I should say this depend on the edge banding machine and the glue when using PVC or ABS.

At least, we will not charge customer extra cost. There is no reason.

if one piece, of course, it is better. As you could not see the joint. But the trasportation should be more attended What kind of kitchen top? The quartz?

I think the hinge will be more easy. For the tandem box and even the aventos HF, you should need ask a professional guy to help you. The tandem box including the slider and the drawer, two sides of inner drawer is in grey steel. We are always pre-install all the hardware for customer, as long as they pass the order on us. But if you only buy the hardware from BLUM, they are not responsible for installing. May I know the tandem box you bought in retail store, the M type, the depth is 450MM or 500MM?

He He, in fact your worry is unnecessary. Now most of the MDF used in the cabinet only on door panel, not the carcase. And then now the MDF is becoming more eco,the formaldehyde is very low. Further more, the raw materials of mdf is exposed in the air, for the door panel itself, it must have something cover on face and on the edge. Like melamine, laminate or veneer, the PVC edge banding could also prevent the ommission of formaldehyde. So be ease