papaedmund

Hi again, For your case i think you may call the management and ask the developer to recommend. The developer uses all the same imported sliding mechanism and easier to get and fix by their own people BUTTT....usually they will ask you to settle yourself by calling you own contractor.....reason being($$$$$$ in their pocket,too heavy to come LOL.....Joking lah!)

Hi, You need to open a hole for fan installer to mount the fan bracket at the concrete ceiling. After which have to re-patch back false ceiling. You need 1.false ceiling guy 2.fan installer 3.a painter(or paint the ceiling yourself after re-patch back the hole) Cheers!

Hi, Always a challenge to change this type of rail and rollers. Door is heavy with the glass. 1.Need to unscrew the whole alluminium rail mounted to the top. 2.slanting and slide out the sliding door together with this rail and roller. 3.take existing roller as sample to buy new one,must make sure it fits in the rail 4.if bottom guide spoil,change also Its always easy to say than done LOL.

If you can provide some pictures,i may be able to tell you what are the things thats need to be done.

LEE HUAT HARDWARE INDUSTRIES BLK 3018 BEDOK NORTH ST 5(EAST LINK) #01-01 TEL:64488956 SHANGHAI TONG LEE HARDWARE PTE LTD 200 JALAN SULTAN #01-01,#02-23 TEXTILE CENTRE TEL:62987211 EXCEL HARDWARE PTE LTD 10 ADMIRALTY STREET #03-52 NORTHLINK BUILDING TEL:68533113 THYE SENG ENGINEERING HARDWARE PTE LTD 122 SIMS AVE TEL:67477415 GOOD LUCK!

Hi, Just go to any industrial park and look for those hardware shop that sell furniture fittings.Tell them you want gas spring and i think they'll know.I think you need at least a 15kg type for your case. Good Luck!

Post a picture if you can

http://www.yontat.com.sg/default.aspx?uc=1 Good Luck!

Hi, I can say that its common because is a glossy laminate and it is BLACK in colour,the chances of seeing this problem is high compare to non-glossy type.UNLESS....the door used is make of MDF or Chip Board where the surface is smooth. There are 2 major reasons why this happened. 1.Thickness of laminate used.Laminate comes in 0.7mm-1.2mm thick and if you use a 0.7mm thick laminate its likely to have this problem.My advise is to use 1mm at least for glossy laminate. 2.The plywood used for the doors.If the surface of the plywood used is too 'ROUGH or UNEVEN' and a thin laminate is used, it will have this problem also.(very rare carpenters will sand the surface smooth before applying laminate) BTW.... nowadays the plywood came,the surface are not as smooth as like last time.Laminate quality is also not as good as before. Cheers!

I have the contact to call 67423035....they sell all kinds of film...see until headache Its at kaki Bukit Industrial Terrace.I bought frosted film from them to DIY at my window.

Don't wait.....call an electrician now to check.

Usually this is cause by the levelling of the concrete mortar base.If its leveled...the cabinet should seat on it with just little or no gap at all. From the picture....this gap is too much.But from what i see from the picture..carpenter added a strip of wood underneath the cabinet(usually not). May have to take a whole picture of your kitchen cabinet to have a look

No worry,this is common.......clean the internal with just water.......you may put charcoal or pandan leaf if you want (some people do it this way)......smell will go off after a week or two. Sorry...wonder how to delete a post above

Go to any industrial estate....find a carpentry factory(you will see they make furniture) Tell them dimension and thickness of wood panels you need to cut, and ask for the price.

Hi, Maybe you can try here: Thye Seng Hardware Enterprise Pte Ltd No 122 Sims Avenue , Gelyang, Singapore 387445 Tel : 6747 7415 , 6747 4571 No. 362 Changi Road, 8.9 km, Singapore 419823 Tel: 6440 6206 , 6440 8614 Good Luck!

Hi, Most of the hardware shops at industrial park which sell furniture's hardware or Lea Huat Hardware Industries Blk 3018 Bedok North St 5 (East Link) #01-01 S(486132) Good Luck!

Hi, Is your wardrobe done?....don't think you can get laminate for insides and for both sides of doors. The most is internal with coloured PVC only.

Hi, You may try this number to call and ask them to come down to see and give a quote. TEL:63651487.......sorry forgot the uncle's name. Good Luck!

Hi, As this is not a heavy duty drill,the impact is very small. Anyway you should feel it when you switch to the hammer icon, and you will also feel that the impact is stronger when drilling into the wall. But like you said its at least 20yrs already,the hammer impact may not be working anymore. Best thing is to find a concrete area and start testing,you will know immediately. Good Luck!

Hi , There you go :KENWOOD INDUSTRIES PTE LTD No 10 Sungei Kadut Street 3 Singapore 729144 Tel:62695433

Hi,i should say 'YES', since like you said you are not a heavy user. Happy drilling

Hi, Just to share with you guys how to hide a 20cm thick single mattress if space given behind door is allowed. Thank You!

Hi, Yes,alluminium pole systems,baskets or cabinet. You mean glass sliding doors for the wardrobe? Glass sliding frameless? or alluminium frame? You need to have partition at both sides to put up for sliding doors. You need wood frame partition to hold up the acrylic or glass. BTW acrylic is not recommended...glass is better. Regards, papaedmund

Hi again, If glass spacers are use,you need to have holes drilled on the glass and use a male to female glass spacer. Imagine that this male and female spacers are tighten onto the glass, use the end 'HEAD' spacer (usually provided together)and tighten it together with the wood with the 'HEAD' sunken in and flush with the wood. Once its confirm everything is tighten,paste the last outer plywood (usually thin one 3-5mm) and finish with the necessary finishing like sanding and varnishing.(carpenter will know) As in the picture i can't see roughly how thick the wood is and how long the spacer is,this is what i think maybe how it was done and i could be wrong Furthermore, the spacer plus wood cannot be too thick as it may affect the door opening and closing at the side edges. Another easiest way if you do not need to see any spacers but wood only,just use 2 pcs of finished wood with top and bottom already cut in for your finger to grip and glue it to the glass.(of course need stronger glue) Hope you can understand what i said

Hi, The gaps between the wood and glass door can be done easily. You mean the "push" sign thing is a mechanism? Is not something you buy and just paste it on the wood? Sorry i don't get what you mean by this "i just can't figure out where to get the mechanism for the door push handle..."