herbalteh

Thumbs up for Zero. Ordered my Rinnai 3CG cooker hob and Fujioh FX 900 Hood from him 2 weeks ago. Went to paid deposit to Mdm Tan, date was actually scheduled to deliver end March, but due to reno starting and my ID request for the cooker hob to be send in lst, i have to request to Zero to reschedule. Expecting delivery tomorrow. Will recommend him highly to all.... very accomodating.

Hi Nice kitchen you got there. Your sink, is it industrial squarish sink or normal round edge sink? is your tap mounted on the sink or counter top??? thanks

Hi All, Need your advice and contribution... I be doing concrete base for my hot/ wet area. Counter top is granite top instead of homo tiles. Sink wise, I am looking at undermount. Here comes the difficult part. I am being told by my ID to look for sinks that have the tap outlet mounted. Reason given is that lesser chances of leakage and lesser problem should there be leakage. ID also say it will be better to cut a hole in the sink rather than cut a hole in the granite top As i prefer durability, I been looking at industrial sinks (thickness is approx 1.2mm). However, alot of industrial sinks does not have the elongated platform to house the kitchen tap (for under mount purposes). Just to check, if you are looking at doing undermount sink, is your kitchen tap mounted on the counter top or on the sink? Any pros and cons of each position of mount where the tap are located (on the sink or countertop?) ? Thanks in advance

i never took HDB tiles and doors pros - u can use ur cpf to offset the amount tiling cost approx 5k depends on size of flat cons - workmanship and choice of tiles -if u dont like it, have to live with it. For doors, i believe if you engage those manfacturers, can get better quality doors at cheaper prices...i got mine at 290 each..from Yontat doors at Eunos as recommended by one of the forummers here. Service is good. Lots of choices for u to choose, can even add silver colour lining or SS lining...

Hi Bro, May I know how is the performance of your Fujioh FX900? i am currently shortlisting this hood also...but not sure of how is its performance.... Appreciate your kind reviews.. thanks alot

Hacking plus pe approval can come close to 1 k plus Just take note U can try to shift the mbr toilet door Just an idea

Pla7ium can do sliding cabinets doors instead of casement But in order to have full view of the cabinet, The door have to be closed lst

Hi Bro Try LG WFT 9561DD not bad in terms of features... i am targeting this model was quoted around 656$

around 300...depends on size

Try this forum guy called zero He can match prices He got a thread here So far his price matching equivalent to neighbourhood shops

Fridge and washer I mainly look at cost ( which one more value), warranty terms and duration, and reliability Lg not bad for washer, formerly is goldstar Fridge can look at hitachi which have anti mold seals This feature normally is one of the wear and tear item in fridge tht is more prone to failure

Bro Be careful on the Mitsubishi fridge There is one model selling around 1k The model is 62c if I rem correctly This model helps to save water U need to remove the condensed water in the tray located at the bottom of the fridge I was short listing this model until I know of this water saving feature which uses older technology Haha

9k is good enough to cool one room one normal room requires about 8k approx too cool down... unless u talk about living room, which need higher btu

Hi I received a number of pms asking me for contacts for the ac installer. I have no problems in sharing the contacts. However, I wish to clarify tat I am in no way linked to my installer in terms of montenary gains and there are no commission given to me if u have engaged them Each call or discussion with my recommendations are solely between u and the installer Although my own personal findings and experience with their work is satisfactory and have been a pleasant one, and also after knowing them due to my previous work ( I used to sell ac refrigerants), it would differ from people to people due to different sets of expectations I would like to seek ur kind understanding that decision to use or to engage them should be after ur own research and findings or sourcing of other quotes as a comparison I like to stress that I would not like or want to be held responsible for anything tat MAY go wrong as diff pple do have diff expectations It is a no obligation thing and up to each individual comfort level Good luck and happy sourcing Regards Yee

Ok See how it goes

Hi excited84 U might want to try my recommendation Not sure if I got pm u or not

Hi excited84 U can search for *spam here Got Gd and bad reviews Or try one guy nick is zero He got one thread here Hi Kim Congrats

Hi excited84 U can search for *spam here Got Gd and bad reviews Or try one guy nick is zero He got one thread here Hi Kim Congrats

hahaha thats what i tot also... this type of thing...if kena arrowed or nominated, can say dont go or not??

The shop should be facing te former safra If I am not wrong I am gg there this sat to ask for prices

Hi Bro.... I know liao... The shop should be inside Alexander village.. I be gg there this coming sat. thkx

I will PM you in a short while... on the installer contact. No obligations... 7th floor? the water pressure is good enough. My unit water pressure is like lao sai one... FYI, if you get rain shower, dont get those very very big one...else, the water pressure is like peeing....hahaa

hhaha understand i just went to Rinnai Showroom located at Tannery Lane. A technican showed me around, introducing me to the various models of Cooker Hood and Hob. There is this model with a inbuilt flame and made or Ceran Glass. As for the Hob, various designs, from conventional to designer style. I was quite impressed....

Hi Excited84, If u interested in getting an offer, I can pm u the installer tat I have currently sourced U can emailed them and get ur quote with respect to the system that u need Just tell them u are referred by me No obligations Just an alternative for u to consider Let me know if u are interested Getting more quotes will give u an rough idea of what the market prices are like As for installer It's up to ur comfort level

Hello all, Just to check, may i know what is the size of the wardrobe in your MBR? 5 inch lenght or 6 inch length? As u know, the L shaped MBR is really very small...