MeRfMeRf

Hi Sis, thanks alot! your EM's reno progress is looking good too! ya we went with lighter colours coze the unit itself has very few natural light coming in, whites was used to bring out the brightness and grey overtones add to some lofty themes. yup, the glass partition was to prevent water from splashing and initially there was also a shower screen glass door as well, but due to space constraints, we made do without it, thus the back area of the shower cubicle is exposed still. nope i dint install the false ceiling, the toliets are prefabicated ones and come pre-assembled in a steel frame box will all pippings concealed by HDB originally.

TV Console together with Wall Feature and TV mounted...

last few updates of our place... pics of our Dining Area with the table and chairs/bench in place.

haha, the my DIY mood lamp not so high tech lah, its running on wired power supply. you can easily find this at most lighting shops. do check ya PM for more info on the RGB LED bulb. erm as mentioned earlier, mine was from Klassicut and it is an acrylic based solid top. here are some information which i've come across during my research on Kitchen Worktops. Worktops *info was posted by another forumer on another local forum. hope the info helps! Cheers! MeRf

well if im not mistaken, the solid surface top i got was from Klassicut and they are based in JB, MY. its some form of acrylic according to the installer. there are many other branded one including Corian, Smasung Staron, LG Hausys etc etc. our ID when with Klassicut coze he used them before and cost wise was reasonable. it came as 2 pieces originally when delivered to my place and yes they glued the 2 parts together. the joining line is actually the kitchen sink there, however after joining the 2pcs together, they will then sand down the areas between and polish it off, the line is only visible at certain angles, if not quite flawlessly down. we did the back splash on the area just above the sink so that it also flows along with hood/hob area with the other sides. if you are refering to the black glass panel above the sink on the cabinet, thats actually the dish strainer area. PMs sent!

additional pics of the MBR toliet which i took earlier after the general cleanup...

heres some pics of our very common toliet... planning to install shower curtains later on to prevent water from splashing over to the basin side.

thanks! your renovation also progessing very well! have already PMed ya on the lamp shade. npz!

bro, your progress looking good! seems like next up will be ya carpentry works since 1st coat painting and lights are up liaoz. also cant wait to see ya LED lights up!

Hi NeoBy, after conversion from mm to ft, the cabinets is about 15ft in length incl the tall full ht tower cabinet. the laminates we chose for the kitchen cabinets are from Lamitak. ooh haha, i got my inspiration from the LUMIER3 cube mood lamp but find it quite costly, so got down to DIY-ing one myself. i got the RGB LED light bulb with remote from aliexpress, the floor lamp is bought locally and made up of 120 quadrilaterals the total cost slightly over $100 thereabouts.

here are some pics of my DIY-ed Mood Lamp that i've assembled last night as well...

dropped by our new place last nite to finish off assembling a chest of 6-drawers we gotten from ikea, this would also double up as our bedroom tv console and add additional storage space to our MBR. my wifey also chipped in to help fix it up MALM Chest of 6-Drawers MALM Glass Top

icic, read that ya bought the place coze its near to your son's school, wah the original condition really CMI, nonetheless soon you will have a swee swee home enjoy ya reno journey!