cha_alex

y not? the purpose of making it into 2 parts is for height adjustment

ck tang

Depend on the Stainless Steel grade that they use...... low grade will rust one of the copper pipes pros is that have better heat insulation meaning less heat loss for hot water

yup no other way....

IMHO 1) Good quality plywood usually will have less uneven surface...... plywood come in 1.22m x 2.44m per piece before fabrication. If the plywood cut to cabinet door size which is much much smaller than the plywood full size, logically the uneveness should not be so much obvious, unless the plywood quality is really really bad or they didn't do good in laminating 2) Usually the laminate material come in standard size 1.2 x 2.4 meter

or other alternative is to make suspended cabinet

Generally for commercial usage, there are 2 grades SS 304 SS 316 SS316 has more nickel content which make the steel more durable against rust. How do u know whether the SS is high grade or not?? The easiest way to check is by using magnet. If the magnet does not stick to the stainless steel, then it is high grade SS High grade SS will not rust even though it is being used at coastal areas....

not really....... to have good air circulation better to keep the door open...... when mould attack then no matter how nice and expensive u pour on the toilet design then will be useless............

9500 i bot it 6 mths ago abt 3k no flicker so clear until u can see the actor/actress skin pore hehe

no matter way way u will do to hide the toilet...... also need to consider the air circulation of the toilet, that is more important.......

you can opt for moisture resistant calcium silicate board or cement board..... again it is moisture resistant not water resistant...... excessive water contact is not advised, unless you apply with waterproofing for the portion where have excessive water contact

i m using hitachi....... very happy and so far so good

many

haha then u tell him can i pay u 3/4 only as i will only pay you full if no hollow! Hollowness is caused by lousy workmanship.... there is no tolerance for that in construction practice!

wipe with wet cloth to remove the dust/powder then continue with sealer coat first before you paint with your desired paint

turn off the light or place a pale of water under the light

as long as you keep it clean and wipe the excess after use, won't have this problem

Do you spray on the floor tiles?? I just wanna know whether it will be slippery or not.....

This design would look better.... rather than have long L-box along foyer and Living (kinda look weird)..... and at the same time the L-box will demarcate the living room. It would be nice if you can add curtain pelmet along balcony window/door the same as what i had done for my house... but final decision would be on yours

true, it is man-made material...... harder and tougher than granite, limited design (more towards sparkling speckled like black galazy), limited slab length like granite so will have joint line

got kids just close and lock the windows...... just open the small one on top of the main sliding one for ventilation and air circulation.....

my own experience, get laminate flooring from ID is cheaper than I go direct to the specialist..... this is due to ID co usually have term contract, that is y cheaper Anyway get the direct quotation and make your own comparison........

Anybody can advise which brand and model is good and powerful? TIA

difficult to tell man...... the risk is there......

watch out of this store.... many bad comments in SB Forum