ninja3101

Hi All I intend to wall mount 4 LCD TV in my house. I got a quote from a vendor for the charges 1) TV Wall Mount service for 22inch LCD TV with bracket provided - $25 per unit 2) TV Wall Mount service for 32inch LCD TV - $50 per unit 3) Sanus MF215 "32inch LCD Bracket able to tilt and swing with two arms - $200 Total Charges - 22inch LCD TV install only - $25 x 2 32inch LCD TV install & Bracket provided by vendor - $250 X 2 Final Total = $50 + $500 = $550 So what u all think of the charges cheap or expensive ? Any vendor to recommend ?

Hi Stone23 Which reno company quoto u ? Which are the reno company u have get quoto so far ? For the air-con u can call All Best for the prices

Hi All A few mths ago I renovate my house. It was a nightmare ! The flooring workmanship was badly done. <img src="http://www.renotalk.com/forum/public/style_emoticons/<#EMO_DIR#>/curse.gif" style="vertical-align:middle" emoid="" border="0" alt="curse.gif" /> Further more the reno company is well known. These are the following problems for the flooring 1) Inconsistent joint width 2) Pointing defects - joints not properly filled 3) Pain stains 4) Surface not even 5) Lippage between 2 tiles exceed 3mm - 6mm 6) Some tiles cracks are seen 7) Out of alignment Anyone has similar experience or advices ? Log a report to Consumers Association of Singapore (CASE) or Small Claims Tribunal ? thanks <img src="style_emoticons/<#EMO_DIR#>/sad.gif" style="vertical-align:middle" emoid="" border="0" alt="sad.gif" />

Not possible. haha

How many switches ? How many single & double powepoints ?

Changing the whole coolant copper pipe from fcu and compressor I don think is possible as the casing is cover by build-in wardrobe ? My ID said lesser joints and turning copper pipes will have lesser problem in the long run. He advice to put all the air-con above the bedroom door or near the area. so the drainage and coolant will have shorten path and is better. Re-direct is using electric fan ?

ok.thanks I will take into consideration.

Yes , you can do another switch at downstairs but bear in mind that it a one way switch that means to said where u on is where u off it. Why u want to do another switch outside Master bedroom , why not do outside the common bathroom will be nicer ? U got use rain shower if yes, u must use storage tank heater. For the convert, I not sure. U need to check with the electrician.

Hi tigertgr Any update pics for your home reno ? Which air-con brand u intend to install & from which company ?

In Pic 2 , which position should the air-con to place from 1 -3 ? Or put the air-con unit in-between or below the blue line ? Put it lowered ceiling , is there a reason ? better air-flow and breeze ? If the air-con is place blowing to your head, will cause dry skin or what ?

That a good Idea ! I will give it a try. Your living room air-con is blocked by ?

Hi All Recently I installed a new Mitsubishi Air-Con in my room. Somehow I find that the air-con wind is blocked by the build-in wardrobe. I feel hot & stuffy at the bed top area where I sleep. This is where the air-con is installed but it blocked by the wardrobe Position 1 -3 where the air-con can be relocate Bed Position I am thinking should I relocate the air-con unit to position 3 in picture 2. Anyone got relocate their air-con postion before ? Still possible to relocate and what is a reasonable price ? Please advices ? Don know will cause condensation or drainage problems if relocate ? TIA.

Hi All Recently I installed a new Mitsubishi Air-Con in my room. Somehow I find that the air-con wind is blocked by the build-in wardrobe. I feel hot & stuffy at the bed top area where I sleep. This is where the air-con is installed but it blocked by the wardrobe Position 1 -3 where the air-con can be relocate, I think position 3 is the best to place the air-con but have to put a shelf at postion 4 and Postion 5 will be mounting the tv. Anyone have their air-con unit mounted above TV pics becos afraid of water leaking so have to put a shelf ? Bed Position I am thinking should I relocate the air-con unit to position 3 in picture 2. Anyone got relocate their air-con postion before ? Still possible to relocate and what is a reasonable price ? Please advices ? Don know will cause condensation or drainage problems if relocate ? TIA.

ya, use false ceiling to cover it up if u want it to look nicer. How about the bedroom pictures ?

ya, use false ceiling to cover it up if u want it to look nicer. How about the bedroom pictures ?

It sold at $900k. wow ! The news said as it nice location & view.

Hi I completed my house reno two mths ago. I am installing mitsubishi inverter system 4 but no stock so have wait. I pay $80 for two times installation. The air-con are put above the door of each bedroom this is to have less trunking and cover them using build-in wardrobe. My ID even conceal the drainage pvc pipe with tiles so made it look nicer. It just like why ppl do L-Box and Cornies to cover up ugly electric trunking.

Skidding area is the side of the floor. A few mths ago, I told my ID do not put up the L-Box first. In the end, the OpenNet ppl refuse to run the cabling at the ceiling area. Really waster my time !!!! So I get my electrician to run the cabling in the ceiling. I find the OpenNet contractors just want to faster finish their installation after that take picture so they can claim $ from OpenNet. They don care about the cabling is done nicely or not.

I can understand how you feel. OpenNet contractors said they do not run the cables in false ceiling. They will only run the cables at the skidding area. It would be best to ask your contractor to come to your house and work with Opennet. Do remember to tell your contractors to bring flexible tube to protect the cables.

Thanks for your advice. The contractor will hack the cracks granite and do a polish for the whole house and fill out the gaps. The renovation company is reliable after sales service.

I also think the same with you. For granite impossible to clear the cracks with polish or gridding ! Either hack and redo or compensate.

Hi All I need advice for my house flooring as it done badly. Can the workers do polish or grinding to make it nicer or need to hack everything and redo ? Please help advice. TIA. 1) Gap in between not close nicely and level not even one high and low 2) Cracks are found 3) The gap is a thick and not straight line

Two points per room it for redundant purpose just in case next time one point down, save the trouble to relay the cables. LAN points can be use as telephone phone as well. Have to put the router and cable modem near to OpenNet point.

I think is better to put all Lan point outside or next to the TV console area and next to OpenNet Fiber Point or storeroom to hide it. But u must install the OpenNet Fiber point next to TV point and powerpoint. The wiring will depend on your number of points needed and distance. For me I will be buying a box about 300M sharing with a fren. The remaining I can make DIY cables for connection. U want Cat5e or Cat6 cables ? Recommend brand for Lan cables are AMP Netconnect & Belden but more expensive The 3M brand is also good. Cheaper brand will be like Draka , CMM , Nelken , Niken. If u want to know where to buy, I can PM u the shop address.

It expensive. Are you able to bargain to $80 - $100 per lan point ?