noobhouse

sorry this place u all mentioning issit on 3rd floor in same building as this fashion ah?

hi all, anyone ever employ Hoe aik renovation construction located at clementi? need some feedback pls, thanks.

anybody also know if kitchen door sliding OR swinging type will costs how much? issit MUST be part of the kitchen package or can install on its own? frosted / tempered glass better?

hi hope u're sstill active in e forum, yr glass door is nice. can i have e contact person & no.?? issit just e door person or part of the works by your contractor???

hi all, could someone help see if this order is correct or wrong??? thanks Order of works 1. Painting 2. Installation of air con piping 3. Installation of air con blower & compressor (cause window grilles install in room) 4. Painting 5. Kitchen cabinets, kitchen door, window grilles 6. Electrical (water heat, lights, HOOD – before kitchen cabinets) actually for e hood I not sure if it's done by electrician or e hood ppl

any help pls ? & in addition how to tie in with the installation of kitchen cabinet ah??? help

hi minb, yeah pls let us know i also keen. hi hazelsee, anyone u know use her services before? it'll be nice if can see some of her finished works. thanks all!

newer gas, u mean R410A right? well, I'm not exactly one of those greenpeace fellas out there but going with e new gas cause after 2016 they'll slowly stop R22 production & I'm also concerned later on if need to top up or wat then become more ex. Rather than going through all this hassle just use this one. someone it's my 1st aircon, so rather do it properly.

hi just wana check can i supply e dampers (from IKEA) then ask my contractor to install e dampers? they'll just charge me labour right? they won't say insist on buying for me then include e costs in hor?

"2. Supply and install 4ft postform table top ($200.00). I intend to put a cooker hob on top, which means most of the area top are occupied by the cooker hob" sorry hijack thread. jaskel, do i have to include this no. 2 clause in so e contractor know i'm putting a hob & hood there? do i give him e measurement after i find e hob 1st r afterwards? thanks.

taide leh, can't find

was reading on this thread, would like to know his full company name & location if anyone has it so i can blacklist it as ah soon is a pretty common name. am in process of finding contractor so dun wish to end up another victim, many thanks.

skywire, which outlets u finally settle at. if order now, they can install e date u want right? payment issit full or just deposit will do? any idea how many non inverter left? thanks. if not convenient can PM me? i worried out of stock

eh is this e same jason u all seeking?? dun seem positive to me leh... is this e same jason u're all seeking??? dun look so postitive at all leh, more like nightmare. http://www.renotalk.com/forum/index.php?au...8&&st=0

is this e one ah? http://www.singaporeexpo.com.sg/index.php?...7&Itemid=38

hi skywire, hmmm i'm actually looking at exactly the same thing cept it's new gas. u mean to say e 5 yrs warranty have to pay $359 ah? gosh, e fella din tell me haha.... , sorry additional trip issit referring to installing airon in different stages?? expo got gain city fair ah??? oh can go c.

actually has anyone actually used hong huat electrical before? cause some reviews would be good. e.g. hong tar used to be quite good but also received negative feedback recently. so workmanship is really an impt consideration, no offence paraman

wow that's $220 cheaper, but anyone use their services before????? thanks paraman for e info !!!

issit ok if i get my own curtain rods & ask contractor install? can i buy from jb also? cause i dun wana get curtains from curtain specialist help help

Visit My Website hope it helps, google is yr best friend. now i need some help.. anyone saw my quotes below issit reasonable? gain city sengkang can order from them? workmanship wise etc.

for e hood point, issit installed by the hob & hood supplier or yr electrician has to do it? & how much will electrician charge if done by him?

hi all, u mean e hood e electrical is done by e electrician? not done by e hob & hood supplier when they deliver to u ah??? & what's e normal rate for it ah?

sorry issit normal for compressor to leak water after installation as well? if yes, u mean daily leak like tat? saw this from another forum "I just bought a System 4 from Gain City and it was installed a week ago. The compressor leaks water as shown below and the servicemen who came from Toshiba says that it is natural / common but I don't think so because I've never seen compressor condensing / leaking water before in my whole life except for single unit window mounted air-con or air-con inside our unit."

ok i went gain city check out mitsubishi non inverter system 3 using R410A new gas. http://www.mitsubishielectric.com.sg...=125&Itemid=84 $2,159.00 1 x MUX-3BD23VB (outdoor unit 1:3 indoor units) Cooling capacity is 6.18kw / 21087 BTU 3 x MS-B10VB (indoor unit) at 2.85kw / 9725 BTU 9+9+9 (actual usage, 8500, 6000 x 2) 16mm (1/4”) drainage pipe (Free) Upgrade ½” insulation Class 1 (Armaflex) from 3/8" will cost additional $120 Upgrade to copper Gauge 22 piping from Gauge 23 piping will cost additional $20 x 3 = $60 Warranty (standard & extended, 1 + 5) No need bracket Total: $2,339 gain city guy also mention it's ok if i wana get e one with newer gas only thing is nxt time replacement will be more ex but with more ppl using R410A aircon, shouldn't be a problem. question: price reasonable? & i called another quote to another guy, forgot to ask which coy he represent, same set, $2,300, if upgrade to 22 gauge copper no extra cost, but he did tell me better to use gauge 23 cause made in thailand whereas 22 made in china, poorer quality. insulation brand is "greenland" local sg made. (is this reliable???) he also mention those inside house he use foam to insulate, outside like aircon ledge area, he use rubber as it's hot & foam will melt. how true?? so means I must request 2 type of insulation material then? hope i din confuse u here, i just wana be triple sure before i confirm. from what i read, gain city workmanship is ok.. anybody got from them latest recently? many thanks for reading

ok i went gain city check out mitsubishi non inverter system 3 using R410A new gas. http://www.mitsubishielectric.com.sg/index...5&Itemid=84 $2,159.00 1 x MUX-3BD23VB (outdoor unit 1:3 indoor units) Cooling capacity is 6.18kw / 21087 BTU 3 x MS-B10VB (indoor unit) at 2.85kw / 9725 BTU 9+9+9 (actual usage, 8500, 6000 x 2) 16mm (1/4”) drainage pipe (Free) Upgrade ½” insulation Class 1 (Armaflex) from 3/8" will cost additional $120 Upgrade to copper Gauge 22 piping from Gauge 23 piping will cost additional $20 x 3 = $60 Warranty (standard & extended, 1 + 5) No need bracket Total: $2,339 gain city guy also mention it's ok if i wana get e one with newer gas only thing is nxt time replacement will be more ex but with more ppl using R410A aircon, shouldn't be a problem. question: price reasonable? & i called another quote to another guy, forgot to ask which coy he represent, same set, $2,300, if upgrade to 22 gauge copper no extra cost, but he did tell me better to use gauge 23 cause made in thailand whereas 22 made in china, poorer quality. insulation brand is "greenland" local sg made. (is this reliable???) he also mention those inside house he use foam to insulate, outside like aircon ledge area, he use rubber as it's hot & foam will melt. how true?? so means I must request 2 type of insulation material then? hope i din confuse u here, i just wana be triple sure before i confirm. from what i read, gain city workmanship is ok.. anybody got from them latest recently? many thanks for reading. :unsure: