ngunadi

Why you never intro me to your brother??? At least he can nego my COV to 0K :D

Please check whether the agent has really submitted the application. Fyi, my agent can even check the earliest slot for the 1st application despite we have not submitted anything. You should get the date within 1-2 days?

I am looking to buy a non-built in oven. The one that you can put on the counter-top kind. I would use it mainly for cooking like macaroni cheese, etc. And also for light baking (I would only bake my favourite cheesecake and tiramisu). Any suggestion for which one I should go for?

You are asking a very ambiguous question. A FSM needs to check the location directly and match with the bazi of the owners to give a correct recommendation. You better check with a FSM.

How about the quality of work? Will the marble really shine again?

I am advised to buy a wind chimes with 4 solid iron rod. It's not the usual one that you can find which is hollow or using stainless steel. Anyone know where to buy?

@samgalz Thanks for the info. I have thought hard for my kitchen. This is the possible arrangement for my kitchen zones. Ideally, I have another counter top + full height cabinet to store my food (cabinet-pantry) and to put my electric kettle, microwave and oven (for light baking). Due to budget constraint, I think it's for other time. Now, I would just make use with what we have.

Most probably for music, movies and games. I am not so keen to have surround speakers because it's a bit troublesome to put the rear speakers. Would it better to use a separate system or a box system? I am thinking to get amplifier and 2 speakers first then slowly add the sub-woofer and center speaker.

Hi Phantom, Slight digress, I am thinking to setup simple and good entertainment system in my future house. Preferable, 2 speakers + sub + centre speaker. Should I buy amplifier ? Any recommendation ? Hopefully can get a value-for-money setup.

Yeah, if can not, most probably we would not tilt the door also. I will check this with my contractor

If you're planning to consult FSM, you might as well make an appointment with the seller so your FSM can audit and maybe your potential contractor to view and get the "feel" of the house. Otherwise, like us, our plan has to be changed totally after FSM recommendation

Coool. Congrtas on your first project.

Sigh ... Another setback. The 2nd appointment would be delayed until 09/03. This is due to seller unable to settle any outstanding amount with HDB. However, I still request for seller to move out on 01/03 and get the keys for HO on the same day. I would also ask him to sign for the HDB Renovaton Permit application. So, at least on 09/03 I could start the renovation. (Otherwise, I don't think we could sign as the flat is not legally ours yet.) The HDB should have done their homework and ensure all the payments arrears settled on the 1st appointment.

When the window blows and turn off the fire, the stove would automatically cut down the gas supply.

I spoke to the ikea assistant, he said the hinge is blum but it's the 2nd class one. Don't know it's true or not

@tracy I haven't got back the quotation from my contractor yet. The cost of LG solid surface starts from $100 per foot run.

(1) S/S Bracket is Stainless steel bracket to mount the compressor outside your unit. If you're replacing current one, you might already have such bracket and don't need to buy new one. (2) Does it include the installation? (3) the model number s not as important as the power of the indoor unit. You need to find out what's the power of indoor unit, eq .. 9000/12000/18000/24000 BTU. The price difference between each class is substantial. (4) I think R22 is the older gas model, you should opt for new one. (5) Any upgrade of insulation and copper piping?

Okay ... plenty of updates. Let's see ... After consultation with FSM, there's some layout changes of the house: 1. Kitchen redo 2. Joining of 2 bedrooms 3. Building partition wall The updated layout would be like this: The main work would be: PART 1: DESIGN SERVICES 1 Site co-ordination & supervision PART 2: DEMOLITION WORKS 1 To demolish existing floor tiles at 02 Toilet. 2 To demolish existing wall tiles at 02 Toilet area. 3 To demolish exisitng Build in Cabinet at Bedroom 1, 2 and Master Bedroom. 4 To demolish exisitng Build in Cabinet at Foyer and Living area. 5 To dismantle existing Kitchen Counter Top. 6 To dismantle existing Sliding Door and Balcony area. To dismantle existing kitchen cabinets, fridge base and half-height wall in kitchen To demolish existing wall between MBR and Bedroom 2 To demolish existing washing machine base To be confirmed PART 3: FLOORING WORKS 1 To supply labour and tools to re-polish existing marble flooring at whole unit. 2 To supply and lay PE Foam to Level up existing Balcony flooring. Tiles: LSH CI 9029/SFI 200, 20x60cm, $4.50 psf (need other alternative) 3 To supply and install Timber Strip Floor Tiles at Balcony area. 4 To supply and install heavy duty Non Slip Homogenous floor tiles at 02 Toilet. Tiles: LSH ZF6112/30, 30cm2, $2.50 psf 5 To supply and install heavy duty ceramic wall tiles at 02 Toilet area. Tiles: LSH ZF6112/36, 30x60cm, $2.80 psf To supply and install heavy duty ceramic shower wall tiles at 02 Toilet area. Tiles: LSH ZF6114/36, 30x60cm, $2.80 psf 6 To supply and lay water proofing membrane for 02 Toilet area. 7 To supply and install 02nos. Of Shower Kerb at 02 Toilet. To supply and install the missing tiles in Kitchen To supply and install similar tiles for area of existing wall between MBR and Bedroom 2 PART 4: PLUMBING/ SANITARY WORKS 1 To supply and re-run stainless steel piping at 02 Toilet area. 2 To supply labour to install 02 nos. of toilet bowl. 3 To supply labour to install 02 nos. of toilet basin. 4 To supply labour to install kitchen sink and tap. 5 To supply labour to install for Storage water heater (include piping). 6 To supply labour to install toilet acessories. PART 5: CEILING / PLASTER WORKS 1 To supply and install Gysum Board to Box up Piping at Balcony and Living Switch area. To seal up the Bedroom 2 Door PART 6: MISCELLANOUS/ FINISHING WORK 1 Painting for whole unit using ICI Dulux Pentalite Emulsion or Nippon Super Vnilex 5000 Emlusion. Paint inclusive of: a) All doors & doors frame b) Gate and piping 2 General cleaning / Chemical wash for whole unit. 3 Haluage/ Clear debris service. PART 7: CARPENTRY WORKS MAIN DOOR To tilt the wrought iron gate and wooded door by 10" Details to be discussed BALCONY 1 To supply and install casement window for balcony KITCHEN 1 To design and install L16ft Solid Surface worktop c/w front profile and backsplash. (LG) To be re-calculated with new length 2 To supply labour and material to lay L16ft Solid Plwood at Kitchen Counter top area. To be re-calculated with new length 3 To supply and install L16ft Tempered Colour Glass Backing at Kitchen area. To be re-calculated with new length 4 To supply labour and material to re-vanish existing Sliding Door c/w Stain and laquer finish. 5 To supply and install 02nos. Of Swing Door with Spray Paint finish at Sink Below. MASTER BEDROOM 1 To supply labour and material to change wardrobe door with laminated finish. BEDROOM 3 1 To supply labour and material to change wardrobe door with laminated finish. To relocate the bedroom door To be confirmed MASTER BEDROOM TOILET 1 To supply and install L5ft Vanity Cabinet c/w laminate, Mirror and Light Pelmet with laminated finish at MBR toilet. 2 To supply and install L2.5ft Tempered Fixed Glass Panel at MBR shower area. PART 8: OTHER WORKS 1 To supply labour and material to re-vanish existing Main Door c/w Stain and laquer finish. 2 To supply and install 02nos. Of Alumin Bi-fold Door with PVC Panel at 02 toilet area. 3 To apply for Renovation Permit.

Back to reno work mode now @wizi I agree, the balcony is such a small space and it's really silly. Anyway, we decided to bring them in as part of the living room due to relayout. @ossify We definitely not going to get ID. My wife has a degree in architect and she would be the ID I think I would consider Eubiq due to cost issue

I have not confirmed my contractor yet. Maybe I should engage you as well

Keep me updated. Thanks

Yeap, we decied to reno the balcony. Hopefully can get good bargain from the contractor.

There is the typo error in your email. Correct one: mrchang@fengshuiyinyang.com Your one: mrchang@fengshuiyingyang.com

How much is the Embody in Singapore? I am interested to get a good chair like this also.

OG is having promotion on beds. If you are OG members, you can even enjoy 10% additional discounts on top of 0% interest for installment plan.