btzqabc

Hi all, Does anyone know where to find suppliers / manufacturers for backlit mirrors? I am not looking for those 'cove lighting' ones but those that emits light from the mirror itself...as shown in the below link: http://www.crizto.com/productimg/CML-RM-01.jpg Thank you!!!

Yup, there's no storage. It's approx 60-70cm wide. Any other comments ? Any idea how much it would cost or any contractors to recommend ? Thanks!

Hi all, I was quoted this mirror with flourescent lighting (T5) on both sides behind the mirror at $390 per piece not including the flourescent tubes . Is that expensive? Need your help before I say yes or no to my ID. Thanks a lot!

Hi, can anyone PM me his contact too? Thanks.

Hi all, This is my first home so I need help to see if this open concept kitchen quote is ok. 1 Supply labour to hack away L-shaped wall as on plan (Subjected to HDB's $900.00 approval) exclude PE endorsement if required. 2 Haulage of materials, sand and cement plus clear all concrete debris to (Depend on town council) ENV Dumping ground. 3 Supply labour and materials to make good plus patched up affected wall $1,000.00 and floor tiles after hacking of walls. 4 Supply and construct both sides cabinet concrete base. (Sink and cooker) $500.00 5 Supply and construct fridge concrete base c/w matching tile finished. $80.00 6 Supply and lay inlet and drainage water pipes to new sink area. $150.00 7 Supply and construct counter cabinets for sink (11 feet length) in selected $2,800.00 laminate finished c/w 7 long Blum drawer system and 2 short Blum drawer system. 8 Supply and construct low cooker cabinets (4 feet length) in selected $700.00 laminate finished c/w 2 long Blum drawer system. 9 Supply and install selected LG solid surface worktop to the above mentioned $1,800.00 cabinets. (15 feet length) 10 Supply and install white painted glass backing above cooker cabinet. $280.00 12 Supply labour to install kitchen c/w connection. (Sink and tap by owner) $80.00 Note: 1. The total length of the wall hacked is around 5.5m . The contractor explained that the total price of 1.9k is the maximum that I will have to pay just in case there are wires or pipes. Is it still expensive? 2. The drawers are with Blum Tandem System but the drawers are still wooden (built by the contractor). Thanks all!!

Hi all, This is my first home so I need help to see if this open concept kitchen quote is ok. 1 Supply labour to hack away L-shaped wall as on plan (Subjected to HDB's $900.00 approval) exclude PE endorsement if required. 2 Haulage of materials, sand and cement plus clear all concrete debris to (Depend on town council) ENV Dumping ground. 3 Supply labour and materials to make good plus patched up affected wall $1,000.00 and floor tiles after hacking of walls. 4 Supply and construct both sides cabinet concrete base. (Sink and cooker) $500.00 5 Supply and construct fridge concrete base c/w matching tile finished. $80.00 6 Supply and lay inlet and drainage water pipes to new sink area. $150.00 7 Supply and construct counter cabinets for sink (11 feet length) in selected $2,800.00 laminate finished c/w 7 long Blum drawer system and 2 short Blum drawer system. 8 Supply and construct low cooker cabinets (4 feet length) in selected $700.00 laminate finished c/w 2 long Blum drawer system. 9 Supply and install selected LG solid surface worktop to the above mentioned $1,800.00 cabinets. (15 feet length) 10 Supply and install white painted glass backing above cooker cabinet. $280.00 12 Supply labour to install kitchen c/w connection. (Sink and tap by owner) $80.00 Note: 1. The total length of the wall hacked is around 5.5m . The contractor explained that the total price of 1.9k is the maximum that I will have to pay just in case there are wires or pipes. Is it still expensive? 2. The drawers are with Blum Tandem System but the drawers are still wooden (built by the contractor). Thanks all!!

well the thing is I want it to be hidden away from sight..preferably under the sink. But those systems under the sink can cost up to 1k which is too expensive...

I have seen a lot of water purifiers around for drinking but they are really expensive and very complicated. Does anyone know if there is a simple small filter that is like the Hyflux eLife eS-7 Shower Filter ($169) (http://www.hyflux.com/User%27s_Guides_%20&_Manuals/eLife/eS-7%20Shower%20Instruction%20Guide_280806.pdf)? By the way, I know this is for showering but is water from this filter safe for consumption? Thanks!

Hi all, Is there anyone here who have their house renovated by Yellowboots? Any comments about price and quality? Thanks!